Trojan Boat Forum

I am trying to rebuild the teak boards that are on the gunwales of my F32. One of these was destroyed when my boat was in the shop and the guys working on it must have used steel toed shoes and boots, causing the starboard one to break. The screws are still there, just broke the wood. Anyone know where I can get them? Don't know if they are part of the original boat or if the previous owner just bought a piece of teak wook and created the grooves before screwing them in place. Probably should have taken a picture and posted that since my description is not the best for these pieces of wood.

Not sure what year f32 you have there but the originals on our 78 were just teak strips about an inch wide and 10 or 12 inches long....I replaced those with grooved teak boards, one for each side, which sounds like what you might have ......you can buy those in some different sizes from marine suppliers...

Bought mine here . http://www.buckwoodcraft.com/thin-teak- ... thick.html

12" x 3/4" x 1/2" I think they were.

my friend just bought some for a F32, direct match from Jamestown Distributers