Trojan International Logos - Part II
Posted: Tue May 24, 2016 4:57 am
In 2004 we received permission to reproduce the International specific vinyl logos found on the gunnel sides.
We ran ten sets for 10, 10.8 and 11 meter vessels.
The cost at the time was $79.10 for both sides.
One of the Forum members has asked me to see if there is enough interest to do this again.
The cost this time would of course be based on how many sets could be produced. More sets = less cost per set.
So this post is a "floater" to see what, if any interest is out there to run this again.
Here is the link to that 2014 thread which contains several photos.
http://www.trojanboats.net/wforum/viewt ... t=rws+logo
Thanks,
RWS
We ran ten sets for 10, 10.8 and 11 meter vessels.
The cost at the time was $79.10 for both sides.
One of the Forum members has asked me to see if there is enough interest to do this again.
The cost this time would of course be based on how many sets could be produced. More sets = less cost per set.
So this post is a "floater" to see what, if any interest is out there to run this again.
Here is the link to that 2014 thread which contains several photos.
http://www.trojanboats.net/wforum/viewt ... t=rws+logo
Thanks,
RWS