Search found 12667 matches

by prowlersfish
Thu Jan 04, 2007 6:39 pm
Forum: Trojan Boats Forum
Topic: '74 F30 Sportfisherman w. 318's
Replies: 13
Views: 10108

what model f30 do you have ?
by prowlersfish
Fri Oct 20, 2006 6:38 pm
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

16000 lbs with gas engines from the factory I heard thats low same info puts yours at 12000 . so the anser is 4000 lbs more that your boat
now who has more junk on there boat ? I bet I realy start getting heavier then
Paul
by prowlersfish
Thu Oct 19, 2006 8:35 pm
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

Ross to get 80 more hp you need to go with a salt water after cooler also . but for the engine to stand up you need to do internal changes like pistons valve rotators etc. there was a post on boatdiesel about doing this on a 210?? Tony recc it not be done . check the posts maybe you can find it its ...
by prowlersfish
Thu Oct 19, 2006 6:20 pm
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

bosh inline pump 27.6 knots levers to the stops full on fuel and water
same when low no difrenct. but let a few things grow on the bottom she slows down
Paul
by prowlersfish
Thu Oct 19, 2006 6:58 am
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

Ross look at the specs on boatdiesel 210 at 2800 a 215 at 2400
a 355 at 2600 375 at 2800 etc crazy ! he needs to look at the eng plate
by prowlersfish
Thu Oct 19, 2006 6:51 am
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

Ross got the 2800 rpm off f32s 3rd post maybe he can tell us if this is the rated rpm ( you may be correct ) I may go to http://www.boatdiesel.com to check
I am running 22X22 three blade 1.53 gear and 1.5 shaft
by prowlersfish
Wed Oct 18, 2006 7:33 pm
Forum: Trojan Boats Forum
Topic: props for my f-32
Replies: 26
Views: 14781

like capt Ross saysjoin boatdiesel.com best 25 bucks you will spend !
Ross did you mean to do the prop cal. at 2500 ? I belive the rated rpm is 2800 ( not max) corect me if I am wrong
That blue 32 is one nice looking boat I like what he did with the door
I would love to do that to my 36

Paul
by prowlersfish
Sat Sep 30, 2006 8:41 pm
Forum: Trojan Boats Forum
Topic: Wiring Diagram for 1977 F-36 Sedan Convertable
Replies: 1
Views: 2946

I may have it ( have a 77/78 F36 conv ) can you e mail me and I can fax it or may be scan and e mail it PM my e mail to you

Paul
by prowlersfish
Wed Sep 20, 2006 9:32 pm
Forum: Trojan Boats Forum
Topic: Re-Powering an 1973 F32--Diesel or Gas?????
Replies: 26
Views: 17072

diesels the only way to go on anything over 30 foot

Paul
by prowlersfish
Wed Sep 20, 2006 9:23 pm
Forum: Trojan Boats Forum
Topic: 1978 F32 engine start up problem
Replies: 7
Views: 5147

you have a bad balast restor (90%) or switch (10%) that would be my guess
by prowlersfish
Tue Jul 25, 2006 6:41 pm
Forum: Trojan Boats Forum
Topic: Vents for engine room 36 ft 1972 FBSF
Replies: 3
Views: 3457

trojanboats.net has them (becon marine )
by prowlersfish
Mon Jul 24, 2006 1:05 pm
Forum: Trojan Boats Forum
Topic: Spark Plugs
Replies: 11
Views: 6866

have had nothing but proplems with Bosh platinums in any enging
they carbon foul easly cars trucks or boats people put them in and then they come to to see me to get there engine runing right replace the bosch and there good to go ! ( maybe ok for vw and stuff)
by prowlersfish
Sun Jul 23, 2006 9:59 am
Forum: Trojan Boats Forum
Topic: Spark Plugs
Replies: 11
Views: 6866

Bosh platium good for sinkers not any engine I would own . got a ford engine use autolite or motocraft . Gm use A.C. crysler use champ.
over 30 years working on engines I found this is the best bet
Paul
by prowlersfish
Sun Jul 16, 2006 10:57 pm
Forum: Trojan Boats Forum
Topic: Great Oaks Trojan rondevous information request
Replies: 9
Views: 6601

I think It would be a great Idea ! lots of trojans down this way .
by prowlersfish
Sun Jul 16, 2006 8:23 am
Forum: Trojan Boats Forum
Topic: 1982 F32 Air Conditioner
Replies: 1
Views: 2390

all that info should be on a plate on the unit