Stewart Warner Guages

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
Svend
Sporadic User
Posts: 101
Joined: Fri Jul 22, 2016 8:58 am
Location: Gilford NH

Stewart Warner Guages

Post by Svend »

I am putting 2 new stewart warner temp gauges in my 77 f30 with 318’s that i got on Amazon
https://www.amazon.com/gp/product/B002F ... UTF8&psc=1

what temperature sensors should i get for block to send electric signal up to new gauges? i know senders should match gauges

thanks!!
happy 4th!!
1977 Trojan F30 Express, With Dual 318's with Electronic Ignition
Raymarine EV 100 Auto Pilot
User avatar
prowlersfish
2024 Gold Support
2024 Gold Support
Posts: 12645
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Stewart Warner Guages

Post by prowlersfish »

Look up your gauges p/n and it should list the proper sender . The paper work with the gauges should also list the sender range .

They list the temp senders on your Amazon link also
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
BeaconMarineBob
Beacon Bob
Beacon Bob
Posts: 269
Joined: Thu Aug 06, 2009 6:39 pm
Location: Easton, PA
Contact:

Re: Stewart Warner Guages

Post by BeaconMarineBob »

Trojan always used 1/2 NPT best to check the size which you can not do with a ruler. take it to a hardware store and check size with female fitting.
Attachments
A562ABD9-D9A2-47BD-9879-A4E380AE524A.jpeg
A562ABD9-D9A2-47BD-9879-A4E380AE524A.jpeg (83.52 KiB) Viewed 2493 times
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~
Post Reply