No cause then you can play and no one will see you, go stand in the corner where we can watch you!S.A.M. wrote:prowlersfish wrote:S.A.M. wrote:Hey guys,
I think it's time to agree to disagree and move on.
Just try to save someone from a $$$$$$ mistake , I will keep doing so
You don't have to read it .
Now that I've been scolded, I'll go to my room.
10 meter repower
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
Growing old is inevitable,but growing up is optional
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
-
- Registered user
- Posts: 16
- Joined: Sun Jul 25, 2010 10:51 am
- Location: Columbus, Ohio
- Contact:
Thanks for all the great advice.....but i went with the stroked 496. I orderd crank , rods , pistons , cam for both engines..as well i also have two chrysler engines out of an "84" F32 i am rebuilding STOCK. so i can make everyone happy.lol
Keep you guys posted as thing move on
Keep you guys posted as thing move on
"She's Wide in the rear"
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
We agree to disagree.
Please keep us posted on you progress and results.
Also, if you do a search on this site you will find some performance graphs I did when I had the 454's in my 10 meter, prior to the diesel refit.
A comparison would be fascinating.
Best of luck with this project.
RWS
Please keep us posted on you progress and results.
Also, if you do a search on this site you will find some performance graphs I did when I had the 454's in my 10 meter, prior to the diesel refit.
A comparison would be fascinating.
Best of luck with this project.
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Interesting thread ... if you got money ... spend it!
"Fastest One Here" though? Now thats an interesting one ...
My 18 does does 67 (not a PWC either) ... previously had the same engine on a 20' pickle fork that ran 114 ...
My 26 does 54, and my Trojan F32 does 30.
next?
"Fastest One Here" though? Now thats an interesting one ...
My 18 does does 67 (not a PWC either) ... previously had the same engine on a 20' pickle fork that ran 114 ...
My 26 does 54, and my Trojan F32 does 30.
next?
Captain Ross, 2009 Trojan Boater of the Year
"Viva Mahia" F32 Cummins 6BTA diesels,
"Mack Attack" Chaparral 244 Fish, SeaPro 180, McKee 14, Montauk-17
"Viva Mahia" F32 Cummins 6BTA diesels,
"Mack Attack" Chaparral 244 Fish, SeaPro 180, McKee 14, Montauk-17
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
well my Carver does 28 knots (gps) with a full load (no comments Paul ) and a full bath tub to ! on 454's with 1400 hrs. on them. and I won't stand in the corner I don't want to
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
You weren't told to stand in the corner, not yet anyhow! Whats the BATH TUB full of? Cold Beer?alexander38 wrote:well my Carver does 28 knots (gps) with a full load (no comments Paul ) and a full bath tub to ! on 454's with 1400 hrs. on them. and I won't stand in the corner I don't want to
Growing old is inevitable,but growing up is optional
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
Sorry no beer on boat ! Hornsbee hard cider and crown by the gallon and of corse the national drink of Russia.
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
-
- Moderate User
- Posts: 737
- Joined: Tue Nov 17, 2009 10:52 pm
- Location: Ft Lauderdale Fl
- prowlersfish
- 2024 Gold Support
- Posts: 12703
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
summer storm wrote:I really don't know anything about Hi Pro motors but will you have to change the shaft size or strut to handle the added HP and torque?
If your doing it right most likely go up on shaft size and strut to match shaft there are calculators to check for needed shaft strength and size. .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
TRI TUB? What you trying to say there King Paul? Oh, I forgot Carver owner, wannabe TROJAN owner!! My mistake!prowlersfish wrote:alexander38 wrote:well my Carver does 28 knots (gps) with a full load (no comments Paul ) and a full bath tub to ! on 454's with 1400 hrs. on them. and I won't stand in the corner I don't want to
I will say that Tonys tri tub will move a long pretty good , and it sure won't sit in the slip .
Growing old is inevitable,but growing up is optional
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
I'm not wantabe any thing. I'm happy with my boat and have what I want. What say you ?
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
-
- Registered user
- Posts: 16
- Joined: Sun Jul 25, 2010 10:51 am
- Location: Columbus, Ohio
- Contact:
my screen name has to do with Drag Racing...but i have been 7.70et @ 182mph but thats not impressive to you im sure... even if it was done with a 4 cyl. 2.0L 112 cubic inch more than 300HP per cyl. no nitrous. so what i am doing is by far not pushing the bar. but something that takes my mind off drag racing. it just to much fun zipping around the lake with the family
"She's Wide in the rear"
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
Yes I will do the oil burners on the next boat. As we get to this time in our travels the pay back is there. And the next boat will be bigger and the rule of anything over 36' should be a heating oil burner But that doesn't mean a Trojan another Carver say a 4207 or a 44 are on top of my list.
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/