Trojan 10 meter sedan open cummins 370 hp

Mabruteam · Post by **Mabruteam** » Thu Aug 23, 2012 4:06 am

This refit started on 1998. We installed a set of cummins 270 hp, then they got replaced by a new set of cummins 6bta 5.9 370 hp, new bow and stern truster, new custom fuel tanks, 5 kw generator, custom exhausts, complete plumbing, electrical, dash, Davit 600 lbs, lowfrans windlass, toilet, 2 refrigerators, 2 freezers, new nida core floors, hydraulic engine hatch, water maker, 2000 watts inverter charger, garmin 740s gps sounder, underwater lights, holding tank, new toilet, new water tank, new interio, microwave, stove, electric table, new custom air conditioning, if interested I can post some pictures, we use it as a charter boat, cruise 24 kt at 2000 Rpm, 30 kt at 3000, 4 blade 18x18 full cup props, you can see some pictures at http://www.mabrudaycruises.com

Allen Sr · Post by **Allen Sr** » Thu Aug 23, 2012 5:05 am

Welcome to the forum. Nice looking boat.

prowlersfish · Post by **prowlersfish** » Thu Aug 23, 2012 7:29 am

Welcome

Nice , are you selling it ?

yorklyn · Post by **yorklyn** » Fri Aug 24, 2012 8:52 pm

Welcome! What a great looking boat! I would love to see some additional pictures. I'm trying to get some ideas for the cockpit and interior of my 10 meter. I searched for days trying to find a picture of a ten meter with a light yellow or light blue hull. I was having trouble deciding if I would like it or not and never could find a pic. I just placed my awlgrip paint order earlier this week and went with "clould white". I think you may have just cost me another couple hundred in paint! Your hull looks great.

yorklyn · Post by **yorklyn** » Sun Aug 26, 2012 9:35 pm

Found the link to your other pics. Can't believe it was painted in the water. I dont believe i've ever seen a "Sedan open" Is it all custom or did trojan actually make it? Ive only seen them with the enclosed salon.

prowlersfish · Post by **prowlersfish** » Sun Aug 26, 2012 9:38 pm

Sounds almost like a ad ?

RWS · Post by **RWS** » Sun Sep 02, 2012 8:06 am

tried several times to link to the photos but still no luck.

RWS

prowlersfish · Post by **prowlersfish** » Sun Sep 02, 2012 8:22 am

But I did find this

http://www.mabrumarine.com/picture_albu ... l.php?id=6

Dam I looked again , they did paint it in the water .

Torcan · Post by **Torcan** » Sun Sep 02, 2012 8:43 am

prowlersfish wrote:Sounds almost like a ad ?

I agree, that was my first impression

prowlersfish wrote:But I did find this

http://www.mabrumarine.com/picture_albu ... l.php?id=6

Dam I looked again , they did paint it in the water .

Looking at those pics, I wonder how the neighbours felt about the paint spray on the water sticking to their boats.
You can't tell me that it didn't stick at the waterlines.
Unless the plastic wrap was sunk into the water, but it doesn't look like it.
Not to mention the environmental mess that created.

prowlersfish · Post by **prowlersfish** » Sun Sep 02, 2012 9:28 am

Notice the tarp on the boat next to it ? that covers the canvas but what about the rest of the boat ?

there is a containment boom around the boat but how do you suck ths paint out of the water ??

Torcan · Post by **Torcan** » Sun Sep 02, 2012 10:13 am

prowlersfish wrote: there is a containment boom around the boat

That doesn't contain the paint that floats on the air over it, containment booms are for oils etc.

prowlersfish · Post by **prowlersfish** » Sun Sep 02, 2012 10:18 am

Torcan wrote:
prowlersfish wrote: there is a containment boom around the boat
That doesn't contain the paint that floats on the air over it, containment booms are for oils etc.

I agree , as it won't soak up the paint.

gettaway · Post by **gettaway** » Sun Sep 02, 2012 10:28 am

to me it looks like one of the boat yards in mexico, not a marina. maybe something similar in the southeast?

I had my previous boat in the Baja Naval boat yard in Ensenada Mexico a few times for bottom paint and other owrk, the marina and the water look the same except without a cover

Big D · Post by **Big D** » Sun Sep 02, 2012 10:39 am

Aside from all the issues involving other boats, environment, etc., why would anyone even want to do that type of work in the water.

RWS · Post by **RWS** » Sun Sep 02, 2012 11:52 am

take it from me, i've waxed that hull and HATE DOING IT !

She's one bigass hull.

too big for me to think about PREPPING and SHOOTING in the water.

Makes me wonder what she looks like close up.

but that said,

the chiffon yellow really does look damn good on her !

i'd love to see more shots of this unique vessel

RWS