Trojan Boat Forum

thanks guys great ideas!!!jim

Anyone here got any good carpet replacement ideas I've got a 78 clean machine .I can't find anyone to bind the edges and after about a year any carpet replacement frays out and looks like hell .I thought about the carpet squares or laminates but the damp air would probably cause the laminates to war...

load it up with bleach and water and keep flushing

You lucked out I had a similar thing happen about 9 years ago on my 78 clean machine .I wish it was a leaking nut turned out some @#$%&*% ran a stainless screw into the engine bulkhead to hold up a bracket turned out the screw was about an 1 1/4 long and about a 1/8 inch of it ran into the side ...

I would leave a line at the dock at mid cleat (known as a spring line) and hook that first then do exactly as you have been. Other than that, you seem to have a good working knowledge of the use of the helm. Ditto !!! ease your bow in get a spring line on then gently come ahead .If needed turn the ...

:( more than likely the clutches are warped or if bad enough welded together after slipping giving you direct drive .shifting to reverse will sometimes stall the engine.It's a common trouble always check your shifter linkage in foward or reverse to be sure it drops into the detent ball on the side o...

Thanks Guys !! It appears the ladder fittings are through bolted under my headliner or through the small closet .I guess I'll pull them first and reseal thanks Jim

Hi Guys new to the forum great site !!I have a 78 F30 that I have owned for about 14 years recently I notice a soft spot on the bridge by the ladder I drilled several holes in the deck with the intention of injecting West System expoxy into them . My question is this :the holes have wet plywood when...