Trojan Boat Forum

for got to mention that there would also have to be a relay to keep the ACand DC apart to prevent a short the the relay would actavate when you plug in your dock side cord

TNSG456
I think the transfer may be for your inside cabin lights thay work on 12volts thay dont care if its AC or DC as long as its 12Volts dont know of anything else that works 12volt AC on a boat
Eddie-O

Dose anyone know what size stuffing is used in a stuffing box on a 1977 F-32 with i think has a 1.25 shaft
Thanks Eddie-O

shulersbbg if you get chance send me your e-mail address to (qcyclw2@msn.com) have been trying to get in touch with you
Thanks Eddie-O

Do you also know what size packing is used on a 77-f32 stuffing box
Thanks Eddie-O

I used easy-off oven cleaner with a starbrite pad it worked verry well you must wash down with hose when done so you donte damange gell coat
Eddie-O
P.S. I also renamed my boat (to make it my boat)

Duchess do you think the cushions will fit in the V-berth of an F32 if so i could use them i live in bucks county PA. and would be willing to drive to north Jersey to get them
Please let me know Eddie-O

Buckknekkid do you know if both sections are balsa cored
Eddie-O

Are the cabin ceiling and the fly bridge floor two seprate sections and are thay both balsa cored on the 77-f32
Eddie-O

I removed the name off my 77 F32 with oven cleaner (easy off) and it worked very well did not harm gel coat used scots bright pad and washed off with water
Eddie-O

Y-Not please post location and triicks on finding the right location I have not yet installed a pump in my F32 yet and would like the information
Thanks Eddie-O

I am looking for a bimini top for my 77F32 that i am fixing up if anybody is getting a hard top or replacing the bimini thay have please contact me at QCYCLW2@msn.com P.S. the top from F36 will also fit
Thanks Eddie-O

If you find your hardtop I would like to know what you want for your Bimini and Enclosure if it fits an F32
Eddie-O

I had a overheating problem on my 318 it was fresh water cooled the problem was rust forming in the elbows and restricking the water flow out the exhaust also checked trans cooler it had a lot of dirt in it (problem fixed)
Ed