Standard Practice Instructions #32
Also see: http://www.trojanboats.net/trojan-std-p ... -nuts.html
Propeller Installation SPI 32
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
- Beacon Bob
- Posts: 275
- Joined: Thu Aug 06, 2009 6:39 pm
- Location: Easton, PA
- Contact:
Propeller Installation SPI 32
- Attachments
-
- jam-nut.png (270.13 KiB) Viewed 4307 times
-
- jam-nut-photo.jpg (47.2 KiB) Viewed 4307 times
Bob Cushman, Owner
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~
Beacon Marine Supply
Bob@BeaconMarineSupply.com
(609)713-4602
~ Please Contribute to the Forum ~
-
- Registered user
- Posts: 6
- Joined: Thu Jun 30, 2016 10:57 pm
- Location: Middle River, MD.
Re: Propeller Installation SPI 32
Is the diagram contradicting the instructions? Looks like the thin or jam nut is second nut on shaft in drawing. Maybe I'm misinterpreting these instructions ?
- P-Dogg
- Active User
- Posts: 963
- Joined: Wed Jun 22, 2011 7:15 pm
- Location: Near Baltimorgue, Murderland, where they prove every day that gun control doesn't work.
Re: Propeller Installation SPI 32
delusional wrote: ↑Mon Nov 26, 2018 7:18 pm Is the diagram contradicting the instructions? Looks like the thin or jam nut is second nut on shaft in drawing. Maybe I'm misinterpreting these instructions ?
Rot roh! Delusional is not delusional!
The navy has some guidance on this matter: https://fas.org/man/dod-101/sys/ship/nstm/ch075.pdf Se page 75-96 or so.
I needed a less expensive hobby, so I bought a boat!
- prowlersfish
- 2025 Gold Support
- Posts: 12723
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: Propeller Installation SPI 32
Thin nut first is sop . But if you walk around a boat yard you will find about 1/3 to 1/2 on wrong . And if you find a loose prop nut 90% of the time its the starboard side . And the nuts ? its a mix of both ways .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat

- WayWeGo
- 2025 Gold Support
- Posts: 782
- Joined: Fri Feb 13, 2015 11:13 am
- Location: Oakton, VA / Rhode River - Chesapeake Bay
Re: Propeller Installation SPI 32
And WayWeGo is one of those boats that are not installed correctly. She came to us that way and I decided to leave it until the first time the props come off. So far, no issues, but I do check when out of the water and there are cotter pins installed.
1975 F-36 Convertible
Twin Chrysler 440's
Twin Chrysler 440's