Am I nuts?

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
mytrojan
Registered user
Posts: 58
Joined: Mon Jul 23, 2007 12:55 pm
Location: Ithaca NY
Contact:

Am I nuts?

Post by mytrojan »

I am thinking of sealing my teak decks (Silkiens teak). I keep my boat in a boathouse, and the teak is in good shape. I have noticed very small leaks around the forward hatch and around the window when I get caught out in a storm. I have resealed both and can only figure the leak is coming thru the teak somehow. I want to stop this before it gets worse and have big problems. I have used teak oil every year and it looks great. Since it really isn't exposed to the weather that much should I wait and put my $$ into other things on the boat?


PS- DAVE- MY NEW TROJAN FLAG LOOKS GREAT!!
1971 SeaVoyager 36 "Scallywag"
JuiceClark
Moderate User
Posts: 388
Joined: Tue May 02, 2006 10:20 am
Location: Fort Myers, FL

Post by JuiceClark »

I bet if your lucky boat had to sit out in the weather all the time the teak wouldn't leak. With the dew each morning and occasional rain, the teak would swell together tightly.

Wonder if you just oil the heck out of it would it swell together enough?

Tony
Mac32
Moderate User
Posts: 235
Joined: Mon Mar 12, 2007 9:29 pm
Location: Michigan
Contact:

Post by Mac32 »

This may be a little different scenario but food for thought any way.
I just got done stripping all the varnish off my teak cockpit deck that the previous owner put on. Mine had caulked seams that we stripped and are now in the process of re-caulking (actually this is a wife task) because where ever there was a joint the varnish started to crack and peel, in about two - three years is was a total mess.

So I may hesitate if there are seams that may flex or are caulked between boards cause the sikkens or varnish wont flex with it.

Is there caulking between the boards that can be pulled and re-done? This is turning out to be a pretty easy task (especially when you have a willing wife to help):lol:

Just my 2 cents.
MAC32 "Fingers crossed for Flotation"
Image
1967 seavoyager
Moderate User
Posts: 302
Joined: Tue May 27, 2008 1:01 am
Location: Liverpool, NY
Contact:

Post by 1967 seavoyager »

Use the sikkins. the natural looks best. the water is passing thru the teak & soaking the plywood. the plywood is what rots. put on lots of coats, the sun will burn some off. it'll seal real good.
They'll pry a rotten plank from my cold dead fingers before i go "Tupperware". http://www.photobucket.com/restless
seavoyager36@hotmail.com

"Restless"
1967 Trojan 36' Sea Voyager Express
Post Reply