oil cooler? Connections?

cuppa · Post by **cuppa** » Tue Apr 14, 2009 3:39 pm

Any one know what the red bands are? I assume they are something to replace the crimp connection.. I have never seen them before.. The cooler was replaced and these are now leaking....

Any thoughts?

Check the link can't get picture to sho up..

http://briancoffeyrealtor.com/oil.bmp

Stripermann2 · Post by **Stripermann2** » Tue Apr 14, 2009 3:43 pm

It's part of the hose and connector. I just replaced mine last year...they allow the fitting to swivel. The new hoses come with the fittings.

What's the year and engine application?

cuppa · Post by **cuppa** » Tue Apr 14, 2009 5:56 pm

It is a 1985 f-36 with a model 350 (454).

Can you poit me to these on the web? does it not use the crimp connection?

Stripermann2 · Post by **Stripermann2** » Tue Apr 14, 2009 6:03 pm

Does this pic look familiar?

Part numbers are here.

Ref # Part # Description Quantity
LH RH
1 179820 Bolt, 5/16 X 18 X 1 1/4" Hex HD (GR5) 2 2
2 179820 Bolt, 5/16 X 18 X 1 1/4" Hex HD (GR5) 3 3
3 103340 Washer, 5/6 Flat 1 1
4 96566 Clamp 1 1
5 97342 Bracket, Oil Filter Support 1 1
6 20156 Gasket, 1/8 Sq. Ring 1 1
7 97667 Adapter, Remote Oil Filter 1 1
8 22167 Hose Assembly, #10 X 42 1/2" Block to Cooler 1 1
9 22226 Washer, 5/16 Copper Flat 2 2
10 179828 Bolt, 5/16 x 18 x 2 1/2" Hex HD (GR5) 2 2
11 22169 Hose Assembly, #10 x 12" Filter to Block 1 1
12 102634 Nut, 5/16 - 18 Hex 2 2
13 103320 Washer, 5/16 Medium Lock 2 2
14 22168 Hose Assembly, #10 x 53 1/2" Cooler to Filter 1 1
15 30550 Elbow, 1/2 Pipe x 1/2 Tube, Inverted Flair, 90 Â° 1 1
16 30549 Elbow, 1/2 Pipe x 45Â° Inverted Flair 1 1
17 719571 Adapter, Remote Oil Filter 1 1
18 97292 Nipple, Filter Adapter 1 1
19 9002514 Oil Filter, PF2 1 1

cuppa · Post by **cuppa** » Tue Apr 14, 2009 8:46 pm

it does...

So the red band is some time of faster? is it plastic?

Does it fit down in to the rubber hose?

Stripermann2 · Post by **Stripermann2** » Wed Apr 15, 2009 8:09 am

Pay no attention to the red band. Order new hoses and the elbow fittings as needed and be done.

cuppa · Post by **cuppa** » Wed Apr 15, 2009 4:33 pm

So are they new hoses if they have red bands on them or is this some type of aftermarket fix?

Did they replace the cooler and not use new hoses?

Stripermann2 · Post by **Stripermann2** » Wed Apr 15, 2009 4:36 pm

I believe they are original. The parts listed previously are from Crusader.

prowlersfish · Post by **prowlersfish** » Thu Apr 16, 2009 7:40 am

I know yellow bands are used to ID parker pushloc and weatherhead barb-tite fittins . these are both clampless fittings.

http://www.parker.com/literature/Hose%2 ... 1%20B1.pdf

http://www.imperialinc.com/grp161.shtml

cuppa · Post by **cuppa** » Mon Apr 20, 2009 8:54 pm

Does any one happen to know the Diameter of this hose?

Trojan Boat Forum

oil cooler? Connections?

oil cooler? Connections?

Size