Propeller shaft.

pk · Post by pk » Tue Jul 21, 2009 6:48 pm

Hi! I am in a need of a propeller shaft for my Â´84 10 meter Express. Anyone who have one, maybe with a pair of props?

prowlersfish · Post by **prowlersfish** » Tue Jul 21, 2009 8:03 pm

What size props are you looking for ?

guglielmo6160 · Post by **guglielmo6160** » Tue Jul 21, 2009 9:11 pm

I have a spare prop shaft in my garage, not sure what size , but if you give me the particulars its yours if you canuse it

pk · Post by pk » Thu Jul 23, 2009 2:48 pm

Hi Guys! Prop must be 19 x 18, and shaft is 1-1/4 diameter, and the length is 224 cm (metric). Any clue?

rossjo · Post by **rossjo** » Thu Jul 23, 2009 5:54 pm

Don't know length, but F32's also use 1-1/4" shaft ...

RWS · Post by **RWS** » Sat Jul 25, 2009 6:45 am

In my 1983 Express Cruiser I was originally swinging 18x21 4 blade bronze props. Through testing we modified these to 18x19 which for her weight and condition was the most efficient.

The new in the box (at that time) spares that came with the boat were 17x22 Nibral

The factory shaft is 1.25"

RWS

pk · Post by pk » Sun Jul 26, 2009 6:13 am

On the old propeller itÂ´s printed in the center: "FAULKNER 9672", and on the opposite side there is "CP7058". Maybe this will help?

RWS · Post by **RWS** » Sun Jul 26, 2009 7:55 am

To the best of my knowledge, the Internationals with the 454 Crusader gas engines were fitted from the Lancaster factory with 1.25" diamater shafts.

RWS