F32 Parts available

ready123 · Post by **ready123** » Mon May 03, 2010 1:41 pm

Nancy wrote:Do you think there's any water getting in where the helm console fastens to the sole?
Will look forward to the vent photos. Are those overhangs hollow?

No water entered around console, was thoroughly checked even with some test drill holes. Due to the camber of the bridge deck the only way that area gets wet is if there is no bimini or cover to protect it from rain. The sides and fore and aft edges of the bridge are exposed to the weather hence why they are more likely to suffer... it is unlikely that water within the deck would run uphill to under the console, it does run back at the sides of the bridge due to gravity though.
The overhangs have a space between them and the bridge floor which is a cap, an upside down bathtub based on how it was laid up. Since I have sealed the surround with 5200 I want that trapped airspace to breathe.

Fishblues · Post by **Fishblues** » Mon May 03, 2010 9:15 pm

I would like the FB seats, they look in good shape. Are there any tears and would you ship them.
Thanks,
Michael

Fishblues · Post by **Fishblues** » Mon May 03, 2010 9:19 pm

One more thing, do you have the hinges for the rails?

ready123 · Post by **ready123** » Mon May 03, 2010 9:25 pm

Fishblues wrote:I would like the FB seats, they look in good shape. Are there any tears and would you ship them.
Thanks, Michael

Of course I can ship them as long as you pay.

Let's take this to email ready123@rogers.com.
Where do you need them shipped to?
There are no tears... the piping along the bottom of one is pulling a way and just needs to be stapled back down.

ready123 · Post by **ready123** » Mon May 03, 2010 9:27 pm

Fishblues wrote:One more thing, do you have the hinges for the rails?

The rails are full three piece... they have not been cut for the hinges. So they are just like the ones in your picture.

Dan Faith · Post by **Dan Faith** » Tue May 04, 2010 10:52 am

Michael,
sent you both PM and E-mail not sure if the went.

ready123 · Post by **ready123** » Fri May 07, 2010 1:03 pm

Nancy wrote:Will look forward to the vent photos. Are those overhangs hollow?

Vents...

These fill them:

And lastly the bench that is replacing the seats:

Dan Faith · Post by **Dan Faith** » Fri May 07, 2010 1:19 pm

Great idea on the vents, how many did you put in? New seat looks great more storeage. I'll be in touch with you on the rails, checking schedule.

Dan

ready123 · Post by **ready123** » Fri May 07, 2010 2:19 pm

3 each side... yeah the bench allows 2 of us to lay down on those cool days spring & fall to soak up the sun behind the glass enclosure.

No rush with the rails... they are at the back of my storage and all the boat cushions etc: don't come out till next week.

Nancy · Post by **Nancy** » Fri May 07, 2010 7:45 pm

Thanks for the photos, Michael! Everything looks great!

Where did you find those vents?

Nancy

ready123 · Post by **ready123** » Fri May 07, 2010 9:55 pm

Nancy wrote:Thanks for the photos, Michael! Everything looks great!
Where did you find those vents?
Nancy

Thanks for your praise...
Hardware store for the vents... they still have the label on so will make a note of the part number on the weekend.

crewedattempt · Post by **crewedattempt** » Tue May 11, 2010 3:29 pm

Am interested - is it still available? Can you tell me the dimensions? It would be going on an F31...thanks!

g36 · Post by **g36** » Wed May 12, 2010 7:03 am

ready123 · Post by **ready123** » Thu May 13, 2010 8:37 pm

http://www.homehardware.ca/Products/ind ... nd_plstc_1

ready123 · Post by **ready123** » Thu May 13, 2010 8:38 pm

crewedattempt wrote:Am interested - is it still available? Can you tell me the dimensions? It would be going on an F31...thanks!

Folding bench?
not in my for sale list.

Trojan Boat Forum

F32 Parts available

Part for sales

is folding bench still available?

Vents for Nancy

Re: is folding bench still available?