Can anyone tell me the depth of a 1993 Trojan 3700 Express

Laylagray · Post by **Laylagray** » Tue May 25, 2010 11:27 am

I have a 3700 Express Cruiser, 1993, and I am documenting it with the US Coast Guard and they want to know the depth of the boat and I am already in the water. Can anyone help me?

I will check the owner manual when I head down to the boat but since I am at work I thought I would throw it out there. Kinda like a pop quiz! Thanks!

S.A.M. · Post by **S.A.M.** » Tue May 25, 2010 12:14 pm

Your express was built by Carver. There is a Carver Owners Forum where you would get the answer to what your boat draws.

Most of the forum members here are not familiar with the Carver designed Trojan.

But that doesn't mean your not welcome here.

Laylagray · Post by **Laylagray** » Tue May 25, 2010 12:43 pm

Thanks SAM for the info. I will ask them. I have checked out their forums before but they just didn't make me feel as welcome as the Trojan forum does!

prowlersfish · Post by **prowlersfish** » Tue May 25, 2010 1:07 pm

Do you know the name of another boat like yours ? if so you can check to see what the depth is list as on the noaa doc site .

http://www.st.nmfs.noaa.gov/st1/CoastGuard/index.html

Remember this is hull depth NOT draft 2 different things

My f36 is listed as 6.8 feet hull depth ( I draw about 3.5)

A 11 meter I know is listed at 6.7 .

you should be some where in that range

alexander38 · Post by **alexander38** » Wed May 26, 2010 5:08 am

6.7" will work on that hull from Carver, It's very much the same as a 3607 hull. And which Carver (the dark side) site do you speak of ?