Jabsco impellers

[dodgeem]

Currently I have jabsco impellers in my chrysler 440s. The model number is 920-0101. I am having trouble finding that model online. Anyone know a good source?

[oldboat1]

might try NAPA auto supply (likely have a marine catalog at the counter, if you can't get somebody to check for you). I'm pretty sure I bought a Jabsco impeller there a few years back for a Chris Craft I owned at the time -- probably would help to have the parts number for your impeller for possible cross reference. You might also be able to get a match searching by engine model, if there is no category for Trojans.

[rooferdave]

unless I'm missing something here, won't your local marine store carry them? While your at it they advised I change the chamber it sits in as well. It comes as a kit for not a whole lot more

[dodgeem]

No luck at the local West Marine, but maybe the sales guy was having an off day. They had plenmty in there but nothing with the same number.

[Stripermann2]

Are you sure that number didn't change to a 920-0001-P? If so, there are plenty to be had...Regardless, these folks WILL have what you need.

http://www.depcopump.com/datasheets/jab ... 0Parts.pdf

http://www.depcopump.com/home.htm

[risctaker]

Why doesn't Beacon Marine carry Chrysler impellers?

[prowlersfish]

They may, a number off the pump may help too

[rossjo]

Let me know if you can't find them - I'll order a set for you.

[Rich Schwochow]

Try Defender, they have replacements that are blue in color, can run dry for a while, and are priced right. Give them your engine info. and they will find it. I replaced mine on my 360's over 10 years ago and they continue to perform perfectly. (Boy I hope I didn't just jinx myself), I'm not in yet.

[dodgeem]

I'm finding the 0001 model number I just wasn't sure.