
Bimini Boat Top
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
Hey king Paul 

Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
- captainmaniac
- 2025 Gold Support
- Posts: 1922
- Joined: Sat Apr 30, 2005 10:26 pm
- Location: Burlington, Ontario
Larry,
Maybe this will help you visualize what I tried to describe.
Picture this track, mounted on the vertical surface on the inside of your cockpit....

Roughly in this position... one on each side.
Then, in the my previous pic where you can see the framing for the cover coming down, each side of the frame has one of these on the end of it ...

and it is connects to the slider in the first pic. When the cover is up and in place, the sliders are pushed aft and locked in to position. This gives maximum headroom aft and tightens up all the canvas. When you want to go topless, loosen the lock off, slide the sliders forward, and lay the frames and wrapped canvas down on the cockpit floor or just below the aft rail.
Sorry for the picture sizes guys... from Manufacturers web site (http://www.jtstopshop.com).
Maybe this will help you visualize what I tried to describe.
Picture this track, mounted on the vertical surface on the inside of your cockpit....

Roughly in this position... one on each side.
Then, in the my previous pic where you can see the framing for the cover coming down, each side of the frame has one of these on the end of it ...

and it is connects to the slider in the first pic. When the cover is up and in place, the sliders are pushed aft and locked in to position. This gives maximum headroom aft and tightens up all the canvas. When you want to go topless, loosen the lock off, slide the sliders forward, and lay the frames and wrapped canvas down on the cockpit floor or just below the aft rail.
Sorry for the picture sizes guys... from Manufacturers web site (http://www.jtstopshop.com).
Last edited by captainmaniac on Sat Sep 18, 2021 11:34 pm, edited 1 time in total.
-
- Ultimate User
- Posts: 1320
- Joined: Sun Oct 05, 2008 8:45 pm
- Location: Black Creek, Florida
- Contact:
wowzer52 wrote:Hey foofer, on a couple of my previous boats I had pretty much the same top and was able to fold it forward against the hard top to get it out of the way for fishing. Will yours do that also?
I don't think so. Have never tried to swivel it on the forward mount. I bet it would though. I wiill have to try it.
MY CURRENT FLEET
2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

2003 KEY WEST 2020 WA
1978 14' ASHCRAFT SKIFF

-
- Moderate User
- Posts: 743
- Joined: Fri Jul 17, 2009 4:01 pm
- Location: Mt Juliet, TN. Percy Prist Lake, Fate Sanders Marina
Hey foofer,
Thanks for the pic'c,,,,,much help. I would like to know if it will swing forward against the hardtop,,,,for the fishing, ya know.
I did get the pic's of your dinghy, before and saved them. Sorry this is late in my reply,,,just found the added posts today.
wowzer52,,,got any pic's of yours?
Thanks again.
Larry
Thanks for the pic'c,,,,,much help. I would like to know if it will swing forward against the hardtop,,,,for the fishing, ya know.

I did get the pic's of your dinghy, before and saved them. Sorry this is late in my reply,,,just found the added posts today.
wowzer52,,,got any pic's of yours?
Thanks again.
Larry