10 meter port holes
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
10 meter port holes
i have a broken outer trim ring on my 10 meter. It is an 84 with the molded style port holes. does any one have parts for this style port holes?.i found all the hardware and replaced most if it and i replaced all the screens myself i just cant find any info for replacing the outer ring.
Slippery When Wet
84- 10meter
84- 10meter
-
prowlersfish
- 2025 Gold Support
- Posts: 12725
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
-
RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
Had same problem, when I was still a novice during a docking maneuver in a rain/windsorrm with a current.
No replacement was vailabel at the time. When we did the refit we fabricated the missing/broken portion from scratch out of epoxy and ground it/sanded it down to match the existing portion of the ring.
Those "football" sized ports are unique to the earlier International series.
RWS
No replacement was vailabel at the time. When we did the refit we fabricated the missing/broken portion from scratch out of epoxy and ground it/sanded it down to match the existing portion of the ring.
Those "football" sized ports are unique to the earlier International series.
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED