Just adding a nice Fall picture of my 10 meter mid cabin
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
Just adding a nice Fall picture of my 10 meter mid cabin
Hello All,
Just uploading a nice fall picture of my 1990 10 meter mid cabin on a nice fall day. I also uploaded a few pictures of the rear cockpit seats that I re-did to give me more seating and a little bit of an updated look.
Enjoy,
http://s1139.photobucket.com/albums/n551/barryl1/
Barry
Just uploading a nice fall picture of my 1990 10 meter mid cabin on a nice fall day. I also uploaded a few pictures of the rear cockpit seats that I re-did to give me more seating and a little bit of an updated look.
Enjoy,
http://s1139.photobucket.com/albums/n551/barryl1/
Barry
Sweet looking boat!! And it looks like you could remove those cockpit seats easily for fishing
Ron

Ron

When you can't make them see the light, make them feel the heat.
Ronald Reagan
1987 F36 Tri-Cabin
Twin 270 Crusaders
"Special K"
Upper Bay, Chesapeake Bay
http://www.photobucket.com/albums/ff424/rbcool/
Ronald Reagan
1987 F36 Tri-Cabin
Twin 270 Crusaders
"Special K"
Upper Bay, Chesapeake Bay
http://www.photobucket.com/albums/ff424/rbcool/
- alexander38
- Ultimate User
- Posts: 3179
- Joined: Sat Sep 27, 2008 6:48 am
looks nice...like the black canvas...
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !
http://s852.beta.photobucket.com/user/t ... 8/library/
- prowlersfish
- 2025 Gold Support
- Posts: 12725
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
NICE, NICE, NICE !
First time I ever saw a 10 meter with the built in transom step.
The powdercoated bowrail and the new dash make the later 10 meters look even more space age.
I'd like to heal more about exactly how you did the cosmetic interior upgrades. Vinly paint?
For a 22 year old, she shines like new.
RWS
First time I ever saw a 10 meter with the built in transom step.
The powdercoated bowrail and the new dash make the later 10 meters look even more space age.
I'd like to heal more about exactly how you did the cosmetic interior upgrades. Vinly paint?
For a 22 year old, she shines like new.
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
looks great, I can appreciate the work
I'm going to put in a new counter in the head this winter myself and install a single sink in the galley. I'm also going to put in shut off valves in the process.
I have my wetbar home now and working on one of the bigger engine hatches. As I posted a while back, the threaded hold down hardware in the two hatches and rear deck are a bad design. Water gets funneled right into the core with no way out.
My portside engine hatch was really soft so I cut open the backside and installed new balsa coring in about 1/2 of it. I'm eliminating one of hold downs since there's no way to use it anyway with the wetbar fridge in place. This was the root cause since it was open all of these years. I should have it done and back in service by Friday. I'm going to upgrade the sound deadening in the process, there's plenty of room underneath.
Bob
I have my wetbar home now and working on one of the bigger engine hatches. As I posted a while back, the threaded hold down hardware in the two hatches and rear deck are a bad design. Water gets funneled right into the core with no way out.
My portside engine hatch was really soft so I cut open the backside and installed new balsa coring in about 1/2 of it. I'm eliminating one of hold downs since there's no way to use it anyway with the wetbar fridge in place. This was the root cause since it was open all of these years. I should have it done and back in service by Friday. I'm going to upgrade the sound deadening in the process, there's plenty of room underneath.
Bob
1988 10m mid cabin