blower vent

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
wowzer52
Active User
Posts: 959
Joined: Sun Feb 03, 2008 1:21 pm
Location: Longview, Wa.

blower vent

Post by wowzer52 »

When I bought my F-32 the outside bilge blower vent cover was gone. It looks like the glue must have let loose or it didn't get glued very good because there is no residue in the hull hole. I'm looking for one. Any ideas?
Top
fpawn1
Registered user
Posts: 87
Joined: Mon Jun 27, 2005 10:02 am

vent covers

Post by fpawn1 »

I had one damage and two new ones fabricated---cost me about 125-150

howver i think i saw some for sale at beacon marine

good luck frank D.
Top
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12724
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Post by prowlersfish »

Beacon may have what you need . what size is the vent ? is it one of the 4 vents or the clam shell type ?
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Top
Lookout
Registered user
Posts: 51
Joined: Wed Apr 09, 2008 11:34 am
Location: Kenosha, Wi.
Contact:
Contact Lookout

Post by Lookout »

yep, you can get both types premade
  • LOOKOUT AGAIN
  • 1986 F-36
  • Lake Michigan Fish Slayer.
http://www.lookoutcharterservice.com
Top
wowzer52
Active User
Posts: 959
Joined: Sun Feb 03, 2008 1:21 pm
Location: Longview, Wa.

Post by wowzer52 »

I'm taking a week long ferry boat ride up to Alaska this week and when I get back I'll check them out. thanks.
Top
jimini
Registered user
Posts: 81
Joined: Thu Feb 14, 2008 9:36 pm
Location: Suagatuck, Michigan

Post by jimini »

wowzer52
bring me back some gold dust please... about 50lbs would do nicely!
thanks in advance
You've gotta be tough if you're gonna be STUPID!

jimini
Top
wowzer52
Active User
Posts: 959
Joined: Sun Feb 03, 2008 1:21 pm
Location: Longview, Wa.

Post by wowzer52 »

gold dust?... gold dust? I think the dentist ground almost that much off my last crown. He had it all over the place and I thought I heard a vaccuum cleaner going when I left, then when I got the bill I figured he must have billed me for a 50lb. gold tooth, ground it down to a little bitty cap and kept the profit from the grindings and billed me for the vaccuuming labor. ........Hmmm......
Top
Post Reply

Return to “Trojan Boats Forum”