Anyone want some new control knobs ?

Natchamp · Post by **Natchamp** » Mon Feb 06, 2012 6:34 pm

gents,

I machined some new control lever knobs for my boat project as the stock ones were pretty haggered. I machined them out of black acetal (delrin) and while I was at it I used up all the material I had on hand in case someone else would like some. I figure I'd like to support the board as much as I can!

I have 25 knob assemblies left over but since there are 4 knobs per full set that makes 5 sets available. Just let me know and I'll send them out for free (first come first serve).

prowlersfish · Post by **prowlersfish** » Mon Feb 06, 2012 6:41 pm

Nice job , Wish they would fit mine .

Natchamp · Post by **Natchamp** » Mon Feb 06, 2012 6:42 pm

Paul,

What do you have?

prowlersfish · Post by **prowlersfish** » Mon Feb 06, 2012 6:44 pm

I have round knobs , I don't really need any, but you did such a nice job making them .

alexander38 · Post by **alexander38** » Mon Feb 06, 2012 6:46 pm

nice job...pm coming your way..

koviak · Post by **koviak** » Mon Feb 06, 2012 7:31 pm

Natchamp, I sent a PM to you. Also quick question about your generator rebuild. I also have mine out and in the garage for service. Where did you get parts from , and was that white paint high temp.? Thanks again.

Natchamp · Post by **Natchamp** » Mon Feb 06, 2012 7:39 pm

I got most of my parts from onanparts.com but below are some links to additional resources. For paint I just used rustoleum, they don't get "that" hot and rustoleum covers pretty good.

http://onanrebuilding.com/
http://onanparts.com/
http://www.pplmotorhomes.com/parts/onan ... arts-1.htm
http://www.m-and-d.com/index.html?id=BbuLnf2n

And don't forget http://www.smokstak.com/forum/ for good info!

jimmiedcharters · Post by **jimmiedcharters** » Tue Feb 07, 2012 3:32 am

I would love a new set. jimmiedcharters@yahoo.com

Natchamp · Post by **Natchamp** » Tue Feb 07, 2012 8:09 am

JimmyD,

Send me your address and I'll ship them to u.

Mike Kulp · Post by **Mike Kulp** » Tue Feb 07, 2012 12:43 pm

I would love to have a set mine are breaking up, can they be painted ?

Natchamp · Post by **Natchamp** » Tue Feb 07, 2012 1:01 pm

Acetal is pretty adverse to paint. It's slippery stuff, can't imagine anything sticking to it.

Natchamp · Post by **Natchamp** » Wed Feb 29, 2012 1:36 pm

Sorry Mark, they all went pretty fast and I have given them all away.

gardnersf · Post by **gardnersf** » Thu Mar 01, 2012 1:39 pm

Bummer, thats what I get for not paying attention.

Any chance you would make some for sale?

Mike Kulp · Post by **Mike Kulp** » Sat Mar 10, 2012 7:53 pm

Thanks Mark they fit great

Natchamp · Post by **Natchamp** » Sun Mar 11, 2012 8:44 am

Looking good Mike, glad to help.