gen-set and co

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12725
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Post by prowlersfish »

alexander38 wrote:Heat shoot , I grew up in Sabine Pass I can do the heat and raise you 100% swamp humidity, :wink: but I did marry a Yankee and they melt... :lol: :lol:
and She rules too :wink:
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

you bet she does....I can't cook and wash clothes... :lol: :lol:
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12725
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Post by prowlersfish »

And if you could you would not let her know
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

see it all works out prefect for ME. :wink:
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12725
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Post by prowlersfish »

Your a smart guy
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
1967 seavoyager
Moderate User
Posts: 302
Joined: Tue May 27, 2008 1:01 am
Location: Liverpool, NY
Contact:

Post by 1967 seavoyager »

Alexander38, Where did you get that point replacement kit? Is it electronic ignition?
They'll pry a rotten plank from my cold dead fingers before i go "Tupperware". http://www.photobucket.com/restless
seavoyager36@hotmail.com

"Restless"
1967 Trojan 36' Sea Voyager Express
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

1967 seavoyager wrote:Alexander38, Where did you get that point replacement kit? Is it electronic ignition?
yes it is, but tryin' to find one now is almost impossible I bought 2 when I did mine (not for sale :wink: ) there's a post on the site with all the parts needed..
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
Allen Sr
Active User
Posts: 1159
Joined: Fri Oct 15, 2010 6:37 am
Location: Baltimore,Md.

Post by Allen Sr »

I have tried finding them and have had NO luck! :evil:
Growing old is inevitable,but growing up is optional
1984 F36 w/350 Crusaders 'Reel Class'
2011 Trojan Rendevous
Solomons Get Together 2011
Ocean City 2012,2013,2015
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

the guy I got mine from was on E bay paid 225 for each, She who must be obeyed thought I was nuts...but I was perfectly right buying them.. :lol:
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
User avatar
jhalb
Moderate User
Posts: 354
Joined: Tue Mar 29, 2011 6:18 pm
Location: St Louis Mo.

Post by jhalb »

alexander38 wrote:
jhalb wrote:This was talked about on the old Regal forum a couple of years ago. The guy who did it used PCV and drilled a anti-siphon hole in it. From what I recall he said it worked great.
but wasn't that a rear exit under the swim platform...? and used underway ? but that in mind I should be all right,

now to figure out a ez way to install and remove it, and putting it in every anchor set no is biggy have to do poop runs at least twice a day. :wink:

as far as anti-siphon goes would I need that since I'll not be using this underway ? and the elbow will a 45..
It was under the swim platform but thats all I remember.
The old Regal forum was bought out by a SeaRay guy and shut down or I would try to fine it.
John
"PELICAN"
1983 10 Meter Express
User avatar
Big D
Ultimate User
Posts: 2876
Joined: Sat May 01, 2010 10:39 pm
Location: Ontario, Canada

Post by Big D »

Allen Sr wrote:I have tried finding them and have had NO luck! :evil:
If you're looking them up for marine units, I don't think you'll find one. I seem to recall it being available for an RV model, and with some creativity can be modified to fit a marine genny.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
User avatar
alexander38
Ultimate User
Posts: 3179
Joined: Sat Sep 27, 2008 6:48 am

Post by alexander38 »

the units all had to be mod. to work on the mcck just one part # was for the unit, that I found, use the same one for the onan on a ditchwitch I use to own..
Carver 3607 ACMY 454's Merc's
10' Dinghy 6hp Merc.
La Dolce Vita
Let's hit the water !

http://s852.beta.photobucket.com/user/t ... 8/library/
Post Reply