1976' Trojan F-32 Sedan - Looking for anchor replacement

EM63 · Post by **EM63** » Fri Mar 16, 2012 1:23 pm

Back from boat with more measurements. I have made a small drawing:

Hope, it will help.

--
Greetings - Heiner

rbcool · Post by **rbcool** » Fri Mar 16, 2012 6:20 pm

Machen Sie es wieder gutmacht oder macht es Ã¼berhaupt nicht. Die Chancen, dass Sie eine genaue neue Ersetzung finden werden, die genau passen wird, sind nicht gut.

Ron

prowlersfish · Post by **prowlersfish** » Fri Mar 16, 2012 6:34 pm

Ron I will take your word on that

.

Its looking like the one you need is 94020 12HÂ® I what to check one more thing.

jefflaw35 · Post by **jefflaw35** » Fri Mar 16, 2012 6:35 pm

prowlersfish wrote:Ron I will take your word on that .

Its looking like the one you need is 94020 12HÂ® I what to check one more thing.

I was gonna say "UUMMM YEA what he said!!!"

summer storm · Post by **summer storm** » Sat Mar 17, 2012 3:06 pm

rbcool wrote:Machen Sie es wieder gutmacht oder macht es Ã¼berhaupt nicht. Die Chancen, dass Sie eine genaue neue Ersetzung finden werden, die genau passen wird, sind nicht gut.

Ron

Ron, Du hast recht aber vielleicht hat er Glueck!

EM63 · Post by **EM63** » Sat Mar 17, 2012 4:47 pm

I would like to have 'Glueck' cause any other anchor can't replace the original one. The Danforth is the right for our muddy terrain.

Had a speech to our 'Harbour-Chief' and he' says Danforth will be the best.
--
Greetings - Heiner

captainmaniac · Post by **captainmaniac** » Sun Mar 18, 2012 9:22 pm

Heiner - measured my anchor tonight, and think it (mostly) fits your measurements.

Danforth Super Hooker, 13 pound.

Fluke tips : 4: apart.

: 09a9b6ad.jpg (39.31 KiB) Viewed 2004 times

Base to end of flukes : about 18"

: 3e8881fe.jpg (39.1 KiB) Viewed 2004 times

Fluke tips to end of shank : about 12"

: 05393d25.jpg (35.7 KiB) Viewed 2004 times

Base to end of shank : about 28"

: 9fef73ac.jpg (37.15 KiB) Viewed 2004 times

: 62cbd034.jpg (52.98 KiB) Viewed 2004 times

: 5d647816.jpg (51.81 KiB) Viewed 2004 times

Good luck!

prowlersfish · Post by **prowlersfish** » Sun Mar 18, 2012 9:38 pm

The 12H looks real close by the info I have . How ever I have a 12H and the messurments don't jive . the 12H I have is old so I will recheck

EM63 · Post by **EM63** » Mon Mar 19, 2012 1:09 pm

Hi David - thank you very much for your engagement - and: you get a hit

The Danforth Super Hooker 13 will fit our chocks perfectly !

I've been to our dealer and we checked the measurements again - thats wat I was looking for. Now we can order it, and if that anchor is in stock in Italy, we will get it in around 10 days.

Quick enough - on April 4'th is splashing day.
--
Greetings - Heiner

prowlersfish · Post by **prowlersfish** » Tue Mar 20, 2012 7:00 am

Glad you found one that would work ., By the numbers the 94020 12HÂ® would work , But the older one I had did not match up to the drawing , Mostly it had changed . was going to try and find a new one to check but no need now .Tthat hooker looks good too.

lawyerdave71 · Post by **lawyerdave71** » Wed Mar 21, 2012 12:46 am

Hello my fellow Trojaners.

I sent someone a private message but the way this site works, I may have sent it three times.

I am seriously interested in acquiring a set of the toe stubber anchor holders from those of you who installed an anchor pulpit.

I need to replace a half missing part on my 78 F-30 plus I would like a second set as I do intend to do some serious anchoring and would like a 2nd set for my 2nd anchor.

I would love a pulpit bit in Illinois, they charge charge for every inch!!!!!

Next year, I will have to pay more due to my having ordered a custom made swim platform which will make my F-30 an F-33!!!!!!!

Lake Michigan is not a gentle giant so that is why I want two sets as I do not want to get up every ten minutes to see if I am floating to doom!

lawyerdave71 · Post by **lawyerdave71** » Wed Mar 21, 2012 12:52 am

I want to go with 2 anchors otherwise you will see on CNN some idiot's boat on Lake Shore Drive - "key music"

larryeddington · Post by **larryeddington** » Wed Mar 21, 2012 11:23 am

I have the set from my F28, they are bronze not chrome and I am not going to reuse as will build a pulpit.

EM63 · Post by **EM63** » Thu Mar 22, 2012 3:21 pm

Does this item will be the right one ?

http://www.ebay.com/itm/120869956274

prowlersfish · Post by **prowlersfish** » Thu Mar 22, 2012 5:49 pm

They look to be larger then what you have now .