I am looking for a 10 meter express radar arch--condition is of no concern- Damaged is fine as I will reglass it before installing. Anyone out there have one?
Thanks
Capt Dana
http://www.fishgh.com
captdana@grandhavencharterboats.com
wanted- 10 meter express radar arch
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- RWS
- Ultimate User
- Posts: 2857
- Joined: Sat Feb 18, 2006 7:01 am
- Location: West Coast Florida
- Contact:
this will most likely be the needle in the heystack, if it even exists.
Mark (Natchamp) was talking about removing his in favor of an alternative.
That's where I would start.
It is unlikely that anyone has a spare laying around.
Crating/SHipping may be an issue.
RWS
Mark (Natchamp) was talking about removing his in favor of an alternative.
That's where I would start.
It is unlikely that anyone has a spare laying around.
Crating/SHipping may be an issue.
RWS
1983 10 Meter SOLD after 21 years of adventures
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
Yanmar diesels
Solid Glass Hull
Woodless Stringers
Full Hull Liner
Survived Andrew Cat 5,Eye of Charley Cat 4, & Irma Cat 2
Trojan International Website: http://trojanboat.com/
WEBSITE & SITELOCK TOTALLY SELF FUNDED
-
- Registered user
- Posts: 26
- Joined: Wed Mar 21, 2012 10:44 am
- Contact:
-
- Sporadic User
- Posts: 90
- Joined: Tue Dec 09, 2008 3:41 pm
- Location: Grand Haven,MI Lake Michigan
- Contact:
Mark
Well-- I have a few ideas on this
Where exactly are you located? I have a friend who has a trucking company. My thoughts are that I could even have you cut it in pieces to make it easier to ship and then I can glass it back together with reinforcement of aluminum on the inside.
I still have to get back with you about the exhaust ports. It is on my list for next winter.
Where exactly are you located? I have a friend who has a trucking company. My thoughts are that I could even have you cut it in pieces to make it easier to ship and then I can glass it back together with reinforcement of aluminum on the inside.
I still have to get back with you about the exhaust ports. It is on my list for next winter.