New carburators for F-32 arrived !

EM63 · Post by **EM63** » Wed Jun 20, 2012 3:36 pm

Desperately needed carb's arrived tonight:

Need some time to get this stuff here in Germany - hope it will work

--
Greetings - Heiner

Stripermann2 · Post by **Stripermann2** » Wed Jun 20, 2012 6:30 pm

What size CFM Holley's are they?

prowlersfish · Post by **prowlersfish** » Wed Jun 20, 2012 8:04 pm

They do look like high CFM , But they are marine .

Allen Sr · Post by **Allen Sr** » Thu Jun 21, 2012 5:05 am

If it were me, I would be moving those plug wires as far away from those carb's as possible! Not a good idea to have those wires against the carb IMO.

prowlersfish · Post by **prowlersfish** » Thu Jun 21, 2012 6:48 am

What are you using for filters ?

rossjo · Post by **rossjo** » Thu Jun 21, 2012 8:14 am

Looks like hes using the gold flame arrestor as the filter - should be OK.

I agree on moving the spark plug wires AWAY from the carb!

prowlersfish · Post by **prowlersfish** » Thu Jun 21, 2012 12:05 pm

duplicate post

prowlersfish · Post by **prowlersfish** » Thu Jun 21, 2012 12:06 pm

I was asking about FUEL filters not flame arestors ( that are not filters )

EM63 · Post by **EM63** » Thu Jun 21, 2012 12:57 pm

Forget the plug wires and the filters - we are still in 'under construction' mode

The Holley's just arrived and tomorrow we will have all that time for fine tuning.

No idea about type and horsepower increasement untill now.
But our specialist will be able to clear all questions tomorrow.

But one thing is for shure: Engines will not smoke any longer and still working at idle.
--
Greetings - Heiner

rossjo · Post by **rossjo** » Thu Jun 21, 2012 6:58 pm

prowlersfish wrote:What are you using for filters ?

prowlersfish wrote:I was asking about FUEL filters not flame arestors ( that are not filters )

Who would know? Should be more specific.

prowlersfish · Post by **prowlersfish** » Thu Jun 21, 2012 7:05 pm

EM63 wrote:Forget the plug wires and the filters - we are still in 'under construction' mode

The Holley's just arrived and tomorrow we will have all that time for fine tuning.

No idea about type and horsepower increasement untill now.
But our specialist will be able to clear all questions tomorrow.

But one thing is for shure: Engines will not smoke any longer and still working at idle.
--
Greetings - Heiner

horsepower increasement ? What is the "specialist " expecting ?

prowlersfish · Post by **prowlersfish** » Thu Jun 21, 2012 7:16 pm

rossjo wrote:
prowlersfish wrote:What are you using for filters ?

prowlersfish wrote:I was asking about FUEL filters not flame arestors ( that are not filters )
Who would know? Should be more specific.

I asumed with the flame arester in the photos people would know I was not talking air filters , MY BAD

. ( and we had a thread with EM63 on fuel filter just a short time ago ) My Bad again as some may have missed it .
Sorry .

prowlersfish · Post by **prowlersfish** » Fri Jun 22, 2012 9:51 pm

EM63 How did it do today ?

74TrojanF36 · Post by **74TrojanF36** » Sat Jun 23, 2012 7:33 am

Whats a new carb like that cost?

might be something i can try and tackle this fall

EM63 · Post by **EM63** » Sat Jun 23, 2012 3:02 pm

Hello again - back from second test ride

At first: We didn't have bigger flame arrestors until now (but in the line).
The golden ones are still from the old ones (single register).

Our problem with that dieing engines at idle rpm's by leaving neutral gear
was just a piece of cake.

Look at these pictures - the small holes just have to be closed:

... now we have very well running engines at idle while maneuvering.

I'm not looking for more HP's - but with that Holley's a couple of horses
will come together with that stable cruise at idle.

I'm not a cowboy - just cruising is my favor. And - yes of cause: we had
a 5 minutes ride at 4.000 rpm's - VERY IMPRESSIVE

But, you know - theese are old engines and we will take care of them.
It is good to know that you could have that power in case of ....

Second: Starbord engine runs a little to hot - lower oil level (changing).
Port side flybridge Rev counter is out of order

Port side water separator was 2 times full on one ride ...

No time to shoot any pictures today - but will come soon.
--
Greetings - Heiner