Velvet drive mounts

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 8:22 am

If anyone comes across 2 mounts for a 1:1 velvet drive in the daily internet surfing please let me know. Mine were trashed. Thanks!

Commissionpoint · Post by **Commissionpoint** » Wed Aug 01, 2012 11:00 am

http://www.ebay.com/sch/i.html?_trksid= ... s&_sacat=0

Will any of these work for you?

Stripermann2 · Post by **Stripermann2** » Wed Aug 01, 2012 11:07 am

http://www.marinepartssource.com/chrysl ... -mount.asp

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 11:42 am

hmmm mine dont look like the ones Jamie posted, they kinda look like the 2nd one down on Mikes ebay sheet,. thanks for lookin guys, I didnt see any online this morning

kevin babineau · Post by **kevin babineau** » Wed Aug 01, 2012 2:28 pm

do you have any pics? i will have some shortly.

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 2:37 pm

yes, ill post it when I get off work, thanks

gettaway · Post by **gettaway** » Wed Aug 01, 2012 4:46 pm

Jeff,

let me look in my spare parts box tonight, when I repowered the F-32, I pulled out the 71c's and replaced with twin disc 502'2 I sold the velvet drives but kept the mounts, I offered all of the parts up for free a few months ago just to clean up the side of the house and didn't have any takers on the mounts, I'll have to look and see if I kept them, I may have taken them to the recycle yard, if I still have them I give them to you, just pay the frieght

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 5:15 pm

that would be great of you Scott, I remember when you did that, I didnt realize my mounts were cracked bad untill I sandblasted them last night. Thanks again guys, I put a pic up when I get home in an hour

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 6:00 pm

gettaway · Post by **gettaway** » Wed Aug 01, 2012 10:35 pm

Jeff,

i must have discarded the mounts, they were a little different than your photo anyways,

sorry about that

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 10:54 pm

thats OK Scott, thank you for looking, I do appreciate it!!!, Ill pick some up, I have been surprised to see how mounts can be so different from one to an other..... I got lucky with my motor mounts and am greatly appreciative to the guy that sent me them!!!

Im almost ready to bench test this motor and rebuilt tranny.....

Commissionpoint · Post by **Commissionpoint** » Wed Aug 01, 2012 11:07 pm

Theres a bunch of different ones you can actually use in your application. Its not critical that the ones you use are identical to the ones that came out, just that they have the proper bolt pattern for the gear box and will then bolt to your mounting location. The assembly in between came in several styles over the years.

jefflaw35 · Post by **jefflaw35** » Wed Aug 01, 2012 11:42 pm

I know, Im just a simple guy though, Change is hard these days