mid cabin - rear most exhaust hose size

BobCT · Post by **BobCT** » Mon Aug 27, 2012 8:27 am

I can't quite get the size measured w/o removing the hose. It looks like 5.5". This is the last piece of hose that connects the back of the muffler to the hull. It's about 8" long.

Anyone know for sure?

Mike Kulp · Post by **Mike Kulp** » Mon Aug 27, 2012 4:00 pm

I am not sure but was thinking 5", when I had my mufflers out I am pretty sure they were the same size on both ends.

yorklyn · Post by **yorklyn** » Mon Aug 27, 2012 6:06 pm

I'll try to remember to measure mine tomorrow morning.

yorklyn · Post by **yorklyn** » Tue Aug 28, 2012 5:08 pm

Bob I'm sorry. we left the shop at 430am this morning for an out of town job. I put a reminder in my phone so I wouldn't forget but forgot to turn the ringer on to hear it. I won't be back to Friday. sorry

prowlersfish · Post by **prowlersfish** » Tue Aug 28, 2012 5:31 pm

If its about 5.5" on the outside then it should be 5" on the inside

BobCT · Post by **BobCT** » Tue Aug 28, 2012 6:38 pm

Todd no worries. I was trying to eyeball it with a tape measure. I'll bring a pair of calipers and measure it that way. It probably is 5".

I'm trying to avoid taking the old hose until I have the new stuff on hand.

larryeddington · Post by **larryeddington** » Tue Aug 28, 2012 7:21 pm

Remember Highe School Geometry, measure around the round object and divide by PI or 3.1416 will give you diameter because the diameter of any circle is 3.1416 of the circumference.