Trim tab hose

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
User avatar
Diverted Income
Moderate User
Posts: 309
Joined: Wed Nov 28, 2012 8:18 pm
Location: N.E. Iowa

Trim tab hose

Post by Diverted Income »

What size is the hydraulic hose on trim tabs?
1982 Trojan F-32 w/Merc 230's
1975 Baja V-1800J w/ 502 Ford
http://missriverrat.com
https://www.facebook.com/UMRMriverrat
Top
User avatar
Stripermann2
Ultimate User
Posts: 3027
Joined: Fri Jan 19, 2007 9:11 am
Location: Solomon's Island, MD

Re: Trim tab hose

Post by Stripermann2 »

I use 1/4" I.D. pressure line hose. No problems so far...
Jamie


1985 F-32 270 Crusaders
1988 Sea Ray 23 350 Merc.
Trojan. Enjoy the ride...

-I don't wanna hear anyone whine...Anymore!
-You might get there before me, but you still have to wait for me, for the fun to start!
Top
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12725
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Trim tab hose

Post by prowlersfish »

I have used automatic trans cooler line for this .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Top
User avatar
prowlersfish
2025 Gold Support
2025 Gold Support
Posts: 12725
Joined: Sat Nov 05, 2005 6:56 pm
Location: Lower Chesapeake Bay ,Va

Re: Trim tab hose

Post by prowlersfish »

I have used automatic trans cooler line for this .
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat :D
Top
User avatar
The Dog House
Active User
Posts: 807
Joined: Mon Jan 09, 2012 6:51 am
Location: Bordentown, NJ

Re: Trim tab hose

Post by The Dog House »

The Boat Leveler trim tab hydraulic hose is 1/4 inch ID and 1/2 inch OD. The working pressure is 400 psi and the burst pressure is 2000 psi. Bob from Beacon mentioned that he had some. You can also get it from Boat Leveler (Insta Trim).
1993 Sea Ray 200 Overnighter OB with 1993 Mercury 150 hp Outboard
1979 Starcraft 14' Rowboat with 2011 Mercury 9.9 hp Outboard
Former boat: 1971 Trojan F26
Top
Post Reply

Return to “Trojan Boats Forum”