window replacement

aaronbocknek · Post by **aaronbocknek** » Tue Oct 21, 2008 7:17 am

still working on that issue. i am putting in a call to mr. weaver at weavers marine service today. ill keep you guys posted. did you read my latest post about the sea cocks? i talked with w/ edwards boat yard yesterday and bill bissell jr said that they can tow her over in march, haul her, put in new sea cocks and then relaunch her. hell, while she is out of the water, i might as well have the bottom painted. i would rather edwards take care of it than take it to intercoastal marine again. it might be more expensive at first, but, since edwards is a refit yard, i tend to think they will do a more complete job. bill said that he wanted the boat for a MINIMUM of 3 weeks out of the water to let the epoxy set properly. that is NOT the answer i got from intercoastal. they said it would ''be just a 4 hour job''..... hmmmmm what do you think?

LHFixer · Post by **LHFixer** » Tue Oct 21, 2008 7:01 pm

I drilled a through hull for my Lectra-san in August. I used 3M FC 5200 and it cured up fast. I had it back in the water the next day. No leaks.

Eric

Looks like this:
http://www.drillspot.com/products/37497 ... ve_Sealant

you can get it pretty much anywhere.

wowzer52 · Post by **wowzer52** » Wed Oct 22, 2008 10:19 am

I put in a new through-hull transducer with 3M-5200 and repainted the bottom and back in the water in 3 days.

count brewski · Post by **count brewski** » Wed Oct 22, 2008 1:46 pm

you got dimensions on that window? I might be able to help you out.....CB p.s. and I'm right down the road from ya

Stripermann2 · Post by **Stripermann2** » Wed Oct 22, 2008 3:21 pm

Count Brewski, where on the Potomac are you located? Did we already discuss this? Thanks.

count brewski · Post by **count brewski** » Wed Oct 22, 2008 9:59 pm

just upriver from Nanjemoy Creek, right at the end of Md.Rte.6......you should be able to see my F-30 from the river, the channel runs close to Md. side where I am...... sitting on blocks on the hill, next to a small travel trailer and white farmhouse....I think we did discuss this before .......by the way, do you know how to post a pic here? I'd like to see if Aaron wants the mast I have on the parts boat..........arf-arf, CB

count brewski · Post by **count brewski** » Wed Oct 22, 2008 10:08 pm

nevermind re:posting a pic, FAQ's just informed me it ain't happenin'......but if anyone (Aaron?) wants to see the mast I have, PM me with an email address and I'll send it to ya

Stripermann2 · Post by **Stripermann2** » Thu Oct 23, 2008 7:58 am

CB, I'm in Colonial Beach. Email me the pic and I'll post it for you.

Reelantsy@aol.com