I have a 1985 10 meter international.
The climate controller has been fried. It almost burned the boat up.
The controller is for heat and A/C, and there's two zones, one in the main salon, one in the v-berth.
The controller had a selector for off, A/C, heat, fan; and another potentiometer for temp setpoint adjustment.
When I looked behind the controller, an Eastern Marine Manufacturing unit, there were numerous jumpers from one spot to another.
I can't make head or tails of it - especially because the ends of the wires are cooked.
Does anyone know where I can get the diagram calling out wire colors and wire usage?
Or can anyone else recommend where to start?
Fortunately the summer has not been real hot here near Detroit, but Sept/Oct may be cool so central heat might be nice.
Thanks
Thanks
Easy Electrical Question
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
- mhandley0711
- Registered user
- Posts: 4
- Joined: Wed May 29, 2013 9:50 pm
- Location: Algonac, MI
- Landlocked
- Registered user
- Posts: 69
- Joined: Wed May 23, 2012 6:26 pm
- Location: Independence, KS
Re: Easy Electrical Question
Can you take a picture of the front of the control? I have a 1985 11 Meter. If the controls are the same I could look at mine and send you pictures, etc.
Lake boaters skip the salt...
1985 11 Meter Sedan
1972 Newman Bassboat
1990 Cyclone Jetboat
1957 Fiberglass Barracuda (Olds 425 cubic Inch, Edelbrock)
1985 11 Meter Sedan
1972 Newman Bassboat
1990 Cyclone Jetboat
1957 Fiberglass Barracuda (Olds 425 cubic Inch, Edelbrock)
- mhandley0711
- Registered user
- Posts: 4
- Joined: Wed May 29, 2013 9:50 pm
- Location: Algonac, MI
Re: Easy Electrical Question
Thanks a bunch, I'll do that.