what's the best way to bring back my interior wood work. it's not bad but it could use a little work.
thanks
interior wood work
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
interior wood work
owner of a nice 1979 f-32
-
ready123
- Ultimate User
- Posts: 1841
- Joined: Sat Nov 08, 2008 5:53 pm
- Location: Mactier, Ontario Canada
- Contact:
Re: interior wood work
We used Murphy's oil to clean it and then Tung teak oil to bring back the COLOUR.
https://www.flickr.com/photos/trojanf32 ... 460733201/
https://www.flickr.com/photos/trojanf32 ... 460733201/
Michael
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Rum is the reason Pirate's have never ruled the world
Done Dreamin'
1987 President 43' Twin Lehman 225SP Turbo
Highfield 310 Ally 15 HP Yamaha 2cycle
1978 F32 Sedan twin 318 Chry SOLD
Safe Cove Marina, Port Charlotte, FL
Re: interior wood work
^He has done masterful work.
Mine needed a bit more work due to a lot of UV and water damage. I had to take it down with 120 grit and recolor with Minwax Red Mahogony. I used a 1 minuted set then 3 coats of Minwax Helmsman. It was the closest match to the original color.
Mine needed a bit more work due to a lot of UV and water damage. I had to take it down with 120 grit and recolor with Minwax Red Mahogony. I used a 1 minuted set then 3 coats of Minwax Helmsman. It was the closest match to the original color.
Re: interior wood work
Beautiful