F32 wiper arm removal
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
F32 wiper arm removal
I was at boat today to remove the wiper arms and can not get them off. They appear to just pull off, but don't budge. What am I missing? Any help appreciated. I don't want to force things and break something.
Gary
Miss Vicki
10 meter international express
F32 express
S. Haven, Mi.
Miss Vicki
10 meter international express
F32 express
S. Haven, Mi.
-
- Moderate User
- Posts: 628
- Joined: Sun Sep 09, 2012 11:30 am
Re: F32 wiper arm removal
Nothing,they are just a little stuck,try tapping on them and use a piece of wood and a large bladed screwdriver to pry with...straighten out the arm as you are prying ,should just pop off.......that is how I got mine off....Mike
- Happy Ours
- Registered user
- Posts: 64
- Joined: Mon Sep 24, 2012 10:56 am
- Location: Ontario, Canada
Re: F32 wiper arm removal
I am not sure how they come off my 1977 F 32, but on my F 26 the part off the wiper that slides onto the wiper motor spindle had a small set screw on the bottom that was used to tighten the wiper arm to the motor, so look around the part you are trying to take off for a small screw, if found loosen the screw and the wiper should wiggle off, hope I explained this properly.
Craig
Craig
1977 F32
1975 F26 sold
AT Young's Point in the Kawartha Lakes on the
Trent Severn Waterway
1975 F26 sold
AT Young's Point in the Kawartha Lakes on the
Trent Severn Waterway
Re: F32 wiper arm removal
Thanks guys. I will look for a set screw and also try the tapping and wood block. I'll let you know how it turns out.
Gary
Miss Vicki
10 meter international express
F32 express
S. Haven, Mi.
Miss Vicki
10 meter international express
F32 express
S. Haven, Mi.