Page 1 of 1

Velvet Drive Rebuild

Posted: Mon Nov 07, 2011 11:48 pm
by bkwesq
Well I nearly broke my back, hands and feet but I got the tranny off the old 318. It looks good I guess who really knows. I want to open it open and take a peek but the one end that attaches to the shaft is held in by a huge nut and the other end that goes in to the bell housing I took all the bolts out and nothing came off. I got new gaskets but I have no idea where they go. Any pointers? I didn't want to pry anything tell I heard from you all- thanks as always.

Bruce

Posted: Tue Nov 08, 2011 6:37 am
by prowlersfish
You can find some info here
http://www.trojanboats.net/wforum/viewtopic.php?t=4263

If you have a 70 , 71 or 72 series I can email you a overhaul manual .

Posted: Tue Nov 08, 2011 8:23 am
by Stripermann2
I overhauled one for a friend the summer before last. Just take your time and comprehend the manual and drawings. You'll be fine.

Posted: Tue Nov 08, 2011 11:05 am
by bkwesq
prowlersfish wrote:You can find some info here
http://www.trojanboats.net/wforum/viewtopic.php?t=4263

If you have a 70 , 71 or 72 series I can email you a overhaul manual .
That would be great! bkw@w-vlaw.com

Posted: Tue Nov 08, 2011 1:12 pm
by prowlersfish
one on the way I will send the other tonight