Prop Question 10M FlyBridge

This forum is for comments and the exchange of information relating to Trojan Boats and boating. Please do not post used parts or boats For Sale in this area. For general, non-boating topics please use our "General Discussions" section.

Note: Negative or inflammatory postings will not be tolerated.

Moderators: BeaconMarineBob, Moderator, BeaconMarineDon

Post Reply
scottfeher
Registered user
Posts: 1
Joined: Sun Aug 14, 2005 1:22 pm
Location: Ellicott City, MD

Prop Question 10M FlyBridge

Post by scottfeher »

What is the recommended prop for '85 10M International FlyBridge w/Crusader 454's. Boat currently has 3 blade wheels, however not able to read the markings to determine size/pitch. It just seems that I should be able to get a bit more speed out of her. Per GPS reading, 14 knots @ 3400rpm.

Please advise.

Thanks,

Scott Feher
Top
Wes
Moderate User
Posts: 301
Joined: Thu Feb 02, 2006 10:03 am
Location: Clinton, Connecticut

prop size

Post by Wes »

Hi Scott,
We have 18/22 props on our 1983 10 meter flybridge/aftcabin. The shafts are 1 and 1/4". The top RPM on ours is 4000 but I think in the original specs it should reach 4400. Our boat is very heavy and we get about 13 knotts at 3400 RPMs.
Wes
Top
Post Reply

Return to “Trojan Boats Forum”