Trojan Boat Forum

are there what your looking for?

they are 1 inch holes

3 blade props and between the blades it says on the side

1) HI TA NAP
2) 14RH RH11 COLUMBIAN
3) 207050

on the ends where the shaft goes through like the circle part it says on side

1) FFG
2) 1411 1133A H/T

one prop is left hand, 1 prop is right hand

I have 2 Brass props off of my 74 31` sea raider for sale, a few nicks but no major damage.
asking 600 Canadian for the pair of them plus shipping costs.

I have heard of and myself am running heavy gauge cable up an putting them in the galley cupboards, thus they are dry from bilge water and easy access.
Rob

hi all I am replacing the rotten decks of my boat with marine grade plywood (5/ that i am coating with waterproofer, for that little bit of extra protection. then I am going to screw it down with stainless screws and then epoxy over the screws.(to fill in the holes) and put that 3M 4200 sealant arou...

hi all I am replacing the rotten decks of my boat with marine grade plywood (5/8) that i am coating with waterproofer, for that little bit of extra protection. then I am going to screw it down with stainless screws and then epoxy over the screws.(to fill in the holes) and put that 3M 4200 sealant ar...

Cook Engine had 1 they are shipping it. i will keep you posted on the project
Rob

I have to replace the pans because thisboat was abandoned by its previous owner and water got in the oilpans and they cracked in the winter. a shame as she is a goregous boatbut now they areboth getting rebuilt, this shouldn`t be a problem for most owners
Rob

I am located in Courtice Ontario, its an hour east of Toronto on lake Ontario but when the boat is in the water it`s in Newcastle, If there is a waterway up to georgian bay i`ll cruise up there next summer.
Rob

does anyone know the standard of marine wiring and what gauge is required where on a boat.as well i have a small breaker panel on the exterior of my sea raider(i`m assuming for the shore power (ac/dc) conversion). is this common? as well as a good place to buy marine wiring as i`m having a hard time...

hey all
does anyone know if automotive oil pans are the same as the marine engine oil pans as i am having trouble finding marine ones.
Rob

Hi Jerry

My email is batmancamaro@hotmail.com

the reason i asked about the gauges is because i need a few because some of mine have cracked glass. i`ll be on my boat tommorrow and i`ll let you know my measurements.
Rob

That is Exactly what my setup looks like. I will keep you posted on how it progresses.
Rob

Hello Jerry THank you for the prompt response, I will take measurements and pass them on to you to see if they willl fit and as for the gauges, i do have twin engines yes but each engine has its own complete set so i believe they will work. Aswell is there a drinking water tank and pump on your part...