long shot... anyone know of a mid cabin parts boat?

[BobCT]

My bow railing is bent on the starboard side along with two of the stanchion supports. I could probably replace those but not sure what my options are for the railing itself.

If I could get another one reasonable priced I would do that since I need to re-bed everything anyway.

Bob

[Rodman]

My bow railing is bent on the starboard side along with two of the stanchion supports. I could probably replace those but not sure what my options are for the railing itself.

If I could get another one reasonable priced I would do that since I need to re-bed everything anyway.

Bob

Railing is quite easy to come buy. Just (Google) it. Hold on Ill do it for you.
'

http://www.defender.com/category.jsp?pa ... &id=309310

http://www.defender.com/category.jsp?pa ... &id=311487

[Stripermann2]

Better yet, why not call Bob for your Trojan parts...I'm sure he can find what you need at a reasonable price. And, you'd be supporting a good cause.

Contact Bob at Beacon Marine Supply -- (609)713-4602

[Rodman]

Better yet, why not call Bob for your Trojan parts...I'm sure he can find what you need at a reasonable price. And, you'd be supporting a good cause.

Contact Bob at Beacon Marine Supply -- (609)713-4602

This is true also.

[MTP]

if bob cant help you, you could contact Capt Ross he offered to do some work for largo

[BobCT]

yes, I'm happy to contact Bob, have bought stuff from Beacon before.

BUT, the reason I asked about a parts boat (in addition to some odds/ends) is that the horizontal bow railing is bent inward. Previous owner hit something.

So, I either need to replace it with another one or try and get it repaired/ straightened. It look like one piece and has the curve going up to the bow.

Maybe not, I haven't actually taken one of these apart before.


Bob

[ready123]

The railing should have small screws underneath where the sections are joined over an inner sleeve. The joint seams often are not clearly visible from the top.

[alexander38]

sounds like something that will have to be made, start at your marina and see if there's anyone that does custom S/S work. most likely they'll have to use the other side to match it up.