New faces on head cabinets (photo included)

Struts and Rudders · Post by **Struts and Rudders** » Thu Mar 17, 2011 3:05 pm

Hello all,

I have just posted a photo of the cabinetry from the head on our F36.

I would rate this job a 0 on the 1-10 degree of difficulty scale....my neighbor did it for me! Thanks Richard.

Doors will be teak..countertop will black granite with SST sink, mirrored faces on the upper piece.

I still have to paint the inside of the cabinets.

SRD
F36

[img][img]http://i1118.photobucket.com/albums/k61 ... i5qcGc.jpg[/img][/img]

gettaway · Post by **gettaway** » Thu Mar 17, 2011 5:17 pm

they look great, was it difficult to get out of the boat without damage?

Struts and Rudders · Post by **Struts and Rudders** » Thu Mar 17, 2011 5:46 pm

No damage here!

They are held in place with screws. The vinyl edging is stapled to the edges you see here so just unscrew the obvious fasteners and tug a little.

My boat is 1980 F36, I cannot speak for your model but would logically assume the similarities are great amongst the line.

It have quite a bit of material left from the 4x8 sheet so I have my eyes open for another project for Richard, which by the way was a great neighbor long before he wanted to volunteer to help on this project.

SRD

gettaway · Post by **gettaway** » Thu Mar 17, 2011 6:08 pm

what material is it made of?
travel for work has kept me away from the boat for a while, and I have a remodel going on at home, sadly, the weather is great and the boat has played second fiddle for a while

Struts and Rudders · Post by **Struts and Rudders** » Thu Mar 17, 2011 6:14 pm

We just re covered what was there with formica.

SRD