Exhaust risers

dodgeem · Post by **dodgeem** » Fri Apr 15, 2011 8:19 pm

I've done a few searches but not finding anything... I've got a 6 inch crack in the port side engine and an appointment to get the bottom painted Monday. The question is can it be welded until I can order a new one?

prowlersfish · Post by **prowlersfish** » Fri Apr 15, 2011 9:32 pm

I would not weld it should be easy to get one , what engines do you Have ? 440s

Stripermann2 · Post by **Stripermann2** » Fri Apr 15, 2011 9:44 pm

As Paul said ...if it has a crack on the outside, how do you know it's not cracked on the inside? The last thing you'd want is for coolant/water to get sucked back through an exhaust port.

Replace it.

dodgeem · Post by **dodgeem** » Fri Apr 15, 2011 9:58 pm

They are 440's. I am trying to track done one locally but no luck so far.

alexander38 · Post by **alexander38** » Fri Apr 15, 2011 11:58 pm

no welding, you need a new set sorry to here you've got a cracked one..how did it crack ?

davidsmith · Post by **davidsmith** » Sat Apr 16, 2011 7:38 pm

E-Basic Power sells manifolds for 440`s.

rossjo · Post by **rossjo** » Sat Apr 16, 2011 11:23 pm

Cracked manifold or cracked block?

Cracked manifold = replace! Why risk it? The manifold has to come off anyway - so replace it and be safe .

dodgeem · Post by **dodgeem** » Sun Apr 17, 2011 7:51 am

New one on the way from ebasicpower.com. Thanks for the help guys.

Trojan Boat Forum

Exhaust risers

Exhaust risers

Exhaust manifold