FYI Good prices on marine grade wire
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
Re: FYI Good prices on marine grade wire
Yorklyn, is the green wire for your bonding system? What gauge is the green bonding wire?
Re: FYI Good prices on marine grade wire
Yes its for bonding. I went with 8 gauge
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
Re: FYI Good prices on marine grade wire
The idea is to keep resistance down to a minimum. Considering the lengths typically associated with the average bonding system, 6 AWG is what's usually recommended these days. And the system is only as good as your connections.gardnersf wrote:....What gauge is the green bonding wire?
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
And thanks to the gang, 2012 Trojan Boater Of The Year
Re: FYI Good prices on marine grade wire
I went with 8ga because that's what was listed on my boats wiring diagram. most of the runs are pretty short. instead of one continuous loop a central bonding bar (bus bar) was used. I agree about the end connectors. I made sure I bought connectors with "closed" ends so the wire is not exposed. I am also using adhesive lined shrink wrap to waterproof the connections. I plan on leaving little slack in each wire to allow me to cut and replace connectors as needed down the road. nothing wrong with going 6ga either. I would not go any smaller than 8.
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
Re: FYI Good prices on marine grade wire
+++1yorklyn wrote:....using adhesive lined shrink wrap to waterproof the connections.....
Use a good quality battery terminal spray and zap all your connections once they're fastened. Some product is thicker than others. I find the good quality thick product doesn't wash away as easy in bilge areas that are always wet. Painting on liquid electrical tape over the connections/fasteners may be just as good but haven't tried that yet for this particular application.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
And thanks to the gang, 2012 Trojan Boater Of The Year
Re: FYI Good prices on marine grade wire
Someone told me to use boesheild spray since its a wax base .
Todd Pote
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
1987 10 Meter Mid Cabin
Double Pote-N_Sea
1992 Scout 15.5 Center Console
Re: FYI Good prices on marine grade wire
Did you order the green 8Ga battery cable? How much did you buy?
- DOUGNASH
- Moderate User
- Posts: 299
- Joined: Thu Apr 15, 2010 7:53 am
- Location: Greenpoint, Brooklyn NY
Re: FYI Good prices on marine grade wire
I am just starting to re-wire my boat.
Between the battery cables running to the DC panels and a 30ft run to my windlass, I needed about 220ft total (110ft pos, 110ft neg)
I was going to order from genuine deals but then I opted for this and saved about $1000
http://www.wireandsupply.com/product_p/ ... h-0-03.htm
Between the battery cables running to the DC panels and a 30ft run to my windlass, I needed about 220ft total (110ft pos, 110ft neg)
I was going to order from genuine deals but then I opted for this and saved about $1000
http://www.wireandsupply.com/product_p/ ... h-0-03.htm
1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"


- DOUGNASH
- Moderate User
- Posts: 299
- Joined: Thu Apr 15, 2010 7:53 am
- Location: Greenpoint, Brooklyn NY
Re: FYI Good prices on marine grade wire
but I plan on using genuine deals for all other wire on the boat 

1985 13 Meter International Express w/ 8v71tti 462hp Detroits, 43' x 16'3"


Re: FYI Good prices on marine grade wire
Wow , great prices. They have the giant crimper for $65 which is cheap.