454's with hurth trans
Moderators: BeaconMarineBob, Moderator, BeaconMarineDon
-
- Moderate User
- Posts: 628
- Joined: Sun Sep 09, 2012 11:30 am
454's with hurth trans
Have any of you guys with that setup had trouble with leaks around the cooler line fittings on the tranny itself....thanks Mike
- prowlersfish
- 2025 Gold Support
- Posts: 12724
- Joined: Sat Nov 05, 2005 6:56 pm
- Location: Lower Chesapeake Bay ,Va
Re: 454's with hurth trans
I have not seen any issues , not too many here using Hurth gears . What model Hurth ?
Boating is good for the soul
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat
77/78 TROJAN F36 Conv.
6BTA Cummins diesels
Life is to short for a ugly boat

Re: 454's with hurth trans
Had that a few times. Mostly a simple matter of tightening a bit. On two occasions they were cracked fittings likely from over tightening. One was caught too late and took out the pump, another took out the tranny.
She was a 1969 36 ft wooden beauty with big blue 440s that we'll miss forever.
And thanks to the gang, 2012 Trojan Boater Of The Year
And thanks to the gang, 2012 Trojan Boater Of The Year
-
- Moderate User
- Posts: 628
- Joined: Sun Sep 09, 2012 11:30 am
Re: 454's with hurth trans
Thanks guys.......something that I noticed on a few boats we looked at and I wondered if it was a common issue with these trans.....Mike
Heh BigD were they just the black painted ones ??
Heh BigD were they just the black painted ones ??