Aqua Meter Compass -- Model 10216 -- Used fair condition -- Compass works -- Red lights for night work -- Came off a 1968 Trojan Sea Voyager 42’ MY -- 7” wide 9” tall -- Only ONE
MerCruiser Raw Water Pump Seal and Bearing Kit -- This kit will work for all the three Mercruiser raw water pumps.
To complete a rebuild of your Mercruiser pump you will also need to get the impeller kit for your raw water pump. Comes with -- 2 bearings -- 2 seals -- 1 bully end seal
Raw Water Pump Impeller Kit
Raw water pump impeller, O-ring and plug kit - For MerCruiser 233 MIE Ford 351 V-8 1975-1976. This kit includes the correct O rings for the old style all brass Mercruiser raw water pump.
Trim Tab Hose
Designed and manufactured exclusively for Trojan Boat Leveler. This trim tab hose is Rated at 2000 lb. burst pressure. Sold per foot -- Enter number of feet in Quantity
Trojan trim tab motor pump. This 12v motor pump can be used to replace the Trojan trim tab pumps in all single cylinder, 12v Insta-Trim systems. For use in both F-Boats or International. This pump unit comes with a housing, reservoir, motor, pump, solenoids and brass hose fittings and 2 stainless steel hose clamps (already assembled). This allows for easy installation
Trojan Seat and Back (fabric)
For folding wood captain chair. When installed over the frame seat is 18" wide and back is 16" wide. Giving a 3" pocket on each side for the back supports and 2" on each side for the side support. Size : Seat 22L x 15.75W - Back 22L X 6.5W - Made of heavy boat canvas
Control Replacement -- Shift or Throttle
This is an easy replacement and comes with instructions. Comes with two red knobs or two black knobs or as seen in photo. Please state at check out which knobs you want This is an excellent replacement for the original Teleflex control seen below.
Morris Handle - Black
Modified TeleFlex handle to fit Morris Control - We recommend buying in pairs so that both handles match (price shown is for a single handle). If you are unsure if your control is a TeleFlex or Morris control please call, text or email us and we will help you identify your control.
Morris Handle - Red
Modified TeleFlex handle to fit Morris Control. We recommend buying in pairs so that both handles match (price shown is for a single handle). If you are unsure if your control is a TeleFlex or Morris control please call, text or email us and we will help you identify your control.
TeleFlex Black Handle
If you are unsure if your control is a TeleFlex or Morris control please call text or E mail us and we will help you identify your control.
Red TeleFlex Handle
If you are unsure if your control is a TeleFlex or Morris control please call text or E mail us and we will help you identify your control.
Chrome plated 1 7/8" fuel fill cap
All Trojan used one of two different fuel fill caps this is the Chrome Plated Bronze for a 1 7/8" fill. The other was a solid stainless steel cap. The stainless steel fill cap has a back which is solid not like this cap which is hollow. If you need a fuel cap and the back is hollow like this cap this is the one you need.
Fuel cap for F-series Trojans (Used)
This cap is Chrome Plated Bronze. There were 2 types of fuel caps used on the F boats: Chrome Plated Bronze and Cast Stainless Steel. The Chrome Plated Bronze has an open back (not solid back)
Swim Platform Transom Mount -- Brass
These mounts are NA and very rare. In latter years these same mounts were made of Cast Aluminum due to cost of brass.
Trojan Swim Platform bracket - S/S
Used, great condition. We can fabricate the bracket to fit F-25 - F-42. Part is NA - Have four only. ** Call for current info and status **
Snap Caps for Interior Finishing
Colors: Red, Burgundy, Tan, Off white, Silver, Light blue, Dark blue, Dark brown, Light brown, Light green ** Sold in bags of 10 -- Indicate color at checkout
Screen for Trojan rectangular all-aluminum port light. Used on many Trojans from early 1960s thru early 1980s. These screens are made in our shop in Lancaster, PA
Teak Trim / Molding
We have lots of small trim, frame, edge and unusual shaped pieces of teak. No large boards. Call with size needed and we will check -- 609-713-4602
Prop Nut Kits
Please tell us the type of Trojan boat you have. Enter the year of manufacture and engine type (in the Comments box) when checking out. If you're not sure -- the hull number will work to ID your boat.
Air Conditioner Strainer
Groco sight glass -- Fits Groco 3/4 in. SV 750 bronze raw water strainer heads -- One-piece molded sight glass -- Includes drain plug and drain plug O-ring -- Cleans easily using only mild soapy water -- Strainer head to sight glass O-ring service kit comes with sight glass
Anchor Chain Deck Pipe - Replacement
Cast S/S -- Pipe size 3-3/4" x 2-1/2" -- Hole size 4-1/8" x 2-3/4" -- Excellent replacement if you lose the cap to your original Trojan anchor chain deck pipe.
Curtain Rod / Slide Track
Plastic slide track -- Have 32 feet -- (sold per foot basis) -- (Enter # of feet needed in Qty) -- Longest length 8’ -- Just the curtain rod - NO Eyelets
Spin on Fuel / Water separator (large .923") and the small (.558") were both used different years if you do not have a canister type fuel filter use the photo with penny as reference -- TRJ7946
Fuel / Water Separation Filter (small) -- small opening (.558") and the large (.923") were both used in different years on Trojans. if you do not have a canister fuel filter see photo with penny as reference.
Fuel Valve - Shut-off
1/4 FNPT - Male/Female - Used on early F- Boats. F-Boats with remote shut off may need to use old handle or file the handle to adapt to remote shut off adapter.
Groco Strainer Service Kit
If your Trojan main engine strainers look like this then you have the new style (1250) 1.25" strainer. This is the service kit for the new 1250 strainer.
Groco SV-1250 Valve (Reconditioned)
Price: $185.00 -- There is a $60.00 core charge. When a complete and serviceable core is returned we will refund your $60.00 core charge. ** MUST call to Order **
Trojan F-25, F-26 Rudder Port
This rudder port was used on F-25 or F-26 with a rudder which has the cavitation plate as part of rudder. On other F-25 and F-26 Trojans the cavitation plate was bolted under the transom and takes a different rudder port. Condition: Used like new. Ready to install. **Only one left -- Part no longer available**
Trojan Plexiglass Windscreens
We can make plexiglass windscreens for any F32, F36 and F40. Full sets or just one plexiglass section. For other Trojans we can fabricate wind screens from the old screens. Prices start around a $990.00 for a full set of three windscreens. Shipping and boxing extra. Local pickup available in PA zip 17582. Call for pricing