Transmission Coupling Puller -- 96.97

Transmission Coupling Puller -- 5" Coupler Flange Removal Tool - Marine Transmission Coupler Removal Tool. Fits most 4" & 5" couplers with a 4 bolt pattern -- 5" Overall Diameter

Trim Tab Cylinder Bracket -- 21.60

Trim Tab Cylinder Bracket
Cylinder Brackets are used on the top and bottom of each hydraulic cylinder. Comes as seen in picture. ** Four available **

Trim Tab Cylinder Pin -- 1.68

Trim Tab Cylinder Pins -- Nylon cylinder pin

Trim Tab Cylinders -- 279.26

Trojan Trim Tab Cylinders
$279.26 for the pair comes with hydraulic line ** Cylinders and hoses only ** (transom and tab brackets are sold separately)

Trim Tab Hose -- 5.64

Trim Tab Hose
Designed and manufactured exclusively for Trojan Boat Leveler. This trim tab hose is Rated at 2000 lb. burst pressure. Sold per foot -- Enter number of feet in Quantity

Trim Tab Hose Cover -- 24.61

Trim Tab hose cover (with screws)

Trim Tab Motor Pump -- 375.60

Trojan trim tab motor pump. This 12v motor pump can be used to replace the Trojan trim tab pumps in all single cylinder, 12v Insta-Trim systems. For use in both F-Boats or International. This pump unit comes with a housing, reservoir, motor, pump, solenoids and brass hose fittings and 2 stainless steel hose clamps (already assembled). This allows for easy installation

Trim Tab Switch -- NEW -- 168.00

Boat Leveler Tab Switch -- NEW

Trim Tab Switch Plate -- 32.13

Trim Tab Switch Plate

H25 Helm Pump -- 450.71

H25 Helm Pump -- Working take out

Helm Kit 40 -- 85.20

Helm Kit 40 for Trojan International 13 and 14-meter boats -- ONE Available

Hynautic Helm Pump Kit - (H50) -- 70.38

Hynautic Helm Pump Kit for H-50
If you are not sure which helm pump you have please call before ordering - 609-713-4602

Hynautic Seal Kit - (H20) -- 71.32

Hynautic Seal Kit - H-20 3/4" shaft for 1979 and newer H-20 Hynautic Helm

Shaft Packing Extractor -- 14.49

Packing extractor

Trojan Shaft Packing -- 29.10

Trojan Shaft Packing
Packing for Trojan shafts -- $29.10 per shaft -- Cut to size -- Please indicate at check out which model Trojan you have. For example F-32, 321, etc. If you are unsure, please call to order -- 609-713-4602

10M Cutlass Bearing -- 160.91

10 Meter Cutlass Bearing
For the intermediate bearing - 1 1/4" Shaft -- Part #TRJCUB

9M Steering Arm Boot (Bellows) -- 79.02

9 meter International Steering boot protective bellows

Cutlass Bearing - 10M -- 158.91

10M Cutlass Bearing
Main V Strut -- 1 1/4" -- Part #15-TRJCOD

Cutlass Bearing - 10M MidCabin -- 159.02

10 Meter Mid-Cabin cutlass Bearing
Part #TRJKIDNA

Rudder Bearing (10M) -- 230.33

Lower Rudder Bearing (10M)
10M lower rudder bearing for 1984- 1988 -- 1 3/8". If you have a pre-1984 10M your rudder shaft could be 1 1/4" if so call us for the correct bearing.

Rudder Bearing (9M) -- 70.20

9 Meter International upper and lower rudder bearings. Two bearings (upper and lower) are need for each rudder. Sold as a set.

Rudder Bearings (11M) -- 123.18

Upper and Lower Rudder Bearings (11M)
Sold as a set (one upper, one lower) -- If you need bearings for both rudders order two sets

Steering Relief Valve -- 199.56

Steering Relief Valve -- MVS21

Upper Rudder Bearing (10M) -- 70.25

Upper Rudder Bearing -- For all 10 meter and Mid cabin 1982-1992 -- One upper bearing needed for each rudder. Sold as a pair -- We also have lower bearings if needed.

Tiller Arm -- Trojan -- 127.50

Tiller Arm -- Trojan -- Fits F-36 and any Trojan with 1 1/4 rudder shaft. We can drill and fit if needed. ** Only TWO available **

Rudders - New & Reconditioned

Rudders -- New and reconditioned - Call for pricing - 609-713-4602

Split Shaft Coupling

Split shaft coupling for shaft size 1", 1 1/4", 1 3/8", 1 1/2" - Call for pricing

Struts - New & Reconditioned

Struts -- New and reconditioned - Call for pricing - 609-713-4602

10M / 10M Mid-Cabin Rudder

Rudder for 10M and 10M mid-cabin Internationals. This is a reconditioned Trojan 10M or 10M Mid-Cabin rudder. This rudder is no longer available as new. Shipping will be charged after rudder ships. It's best to call Beacon Marine to place this order...